Active Thermal Management (ATM) System 4 Enclosure Cooling System
Most cooling systems require openings to both exhaust heated air and to allow fresh air to enter the enclosure, but there are situations in which aesthetic considerations rule out two openings. Built-in cabinets can also be a problem for the custom installer; frequently the only surface available for ventilation is the front, where openings are most visible.
Using only one small opening at the very bottom of a cabinet, trimmed with either a wood or anodized aluminum grille (wall-hung cabinets and cabinets on legs need no grille), the new “6-pack” fan module developed by ATM is powerful enough to quietly force heated air out through the gap (typically 1/8”) between the cabinet’s doors. (See the airflow diagram below.) Where doors close completely, small shims supplied with each system can be used to create narrow gaps. Like all ATM products, the System 4 is completely automatic; fan operation and speed is controlled by the temperature within the enclosure.
While it should not be the “first choice”, the System 4 is appropriate to use when aesthetic considerations rule out other ventilation methods
Specifications
Product |
System 4 |
Fans |
6/80mm |
Airflow (free air, lo/hi speed) |
20/30 CFM (typically 6/12 installed) |
Noise level |
19/22 dBA |
Power consumption |
11 watts |
Control |
Thermal control @ 90°F (lo), 100°F (hi) |
Dimensions |
8.5”l x 4.5”w x 3.125”d |
Dimensions, metric |
216 x 114 x 80mm |
Weight, boxed (lbs/kgm) |
TBD |
ATM part number |
00-602-00 (no grille)
00-602-XX (wood grille)
00-602-NA (natural aluminum)
00-602-BA (black anodized) |
 | Loading… |
 WARNING: This product contains chemicals including Styrene which is known to the state of California to cause cancer, and Bisphenol A (BPA), which is known to the state of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
In certain instances promotional prices will be offered listed above as a “Price with Rebate”, and are typically dated. In these cases Instant Rebate (IR) pricing is good sometimes only for the day only or only for the week. In order to be eligible for IR pricing – the order must be paid for AND picked up/shipped out. If you are placing an online order outside of business hours within your respective time zone, please add a note to your order for the team to confirm the pricing, or contact the branch the following business day to ensure that the item pricing carries over into the subsequent period. If an alternate branch location is still open in another time zone, please reach out to that group.
|