ADC-VDB77 HD VIDEO DOORBELL
HDR 2.4 & 5GHZ
The ADC-VDB770, Alarm.com's next-generation video doorbell camera and the latest installment in the Design Studio Series product line, has an expansive 150° vertical Field of View (FOV), allowing you to monitor the entire doorway area. Two-Way Audio and full portrait viewing in the app make it easier than ever to see a speak with visitors. Plus, the ADC-VDB770 uses video analytics to minimize false-positive motion detection and to enable rapid detection of people, so you receive alerts even if visitors don't ring the bell. Must have Alarm.com account with video analytics package.
Features
- Expansive FOV (150° V, 115° H)
- Full HD (1440 x 1920) video resolution
- High dynamic range (HDR)
- IR night vision
- Video Analytics on the edge for faster, more relevant alerts
- Live video and saved clip viewing
- Two-Way Audio through the mobile app
- Battery heater for low-temperature operation
- 2x2 antenna for improved Wi-Fi range
- Compatible with existing doorbell transformers (requires 16-30 VAC, 10 VA)
- Compatible with mechanical and digital chimes
Included accessories
- Angled mounting wedges
- Power module
- Mounting brackets
- Wire connectors
- Wire extenders
Specifications
Recording compression |
H.264 |
Ingress protection |
IPX4 |
Max resolution |
1440 x 1920 |
Image sensor |
1/2.7" CMOS, 5 MP, 1440 X 1920 |
Lens/angle of view |
150° vertical, 115° horizontal |
Low-light sensitivity |
0 lux with IR |
IR range |
Up to 15 feet (5 meters) |
Image adjustments |
Flip, brightness, contrast, saturation, sharpness, exposure |
Wireless connectivity |
802.11 b/g/n, 2.4 GHz |
Operating temperature |
-22° F to 104° F (-30°C to 40°C) |
Operating humidity |
< 95% (noncondensing) RH |
Dimensions (W x L x D) |
(W x L x D) 1.7" x 5"x 1.5" (42 x 127 x 38 mm) |
Motion sensor |
None (Video Analytics used for motion detection) |
Power requirements
AC transformer |
16-30V AC, 10-30VA* |
DC transformer |
15-30V DC, 8W minimum* |
- ADC-VDB770 Video Doorbell
- ADC-VDB770 backplate with wire extenders
- Removal tool (for removing the Video Doorbell from the backplate after installation)
- Mounting brackets (3)
- Mounting wall screws (2)
- Mounting wall anchors (2)
- Mounting machine screws (2)
- Wire connectors (4)
- Power module (must be installed on all supported chime types)
- Power module adhesive
- Installation guide
- Reference card
Pre-Installation Checklist
- ADC-VDB770 and included accessories
- Wire crimping tool
- Wi-Fi connection to broadband (Cable, DSL, or Fiber Optic) internet
- A computer, tablet, or smartphone with Wi-Fi is required if the router does not have the Wi-Fi Protected Setup (WPS) feature
- Verify that your transformer meets the minimum voltage of 16 VAC and minimum power of 10 VA; specifications are often written directly on the transformer
- Verify that the electricity is turned off at the transformer before installing the power module. Locate your chime box and remove the cover.
- Note the existing wire connections (e.g., the wires may be connected to the Front or Rear doorbell terminal); you will want to connect to the same doorbell terminal in the next step. Loosen the screws on the chime associated with the transformer and doorbell. Set the wires aside.
- Take the power module and hook the curved white wires onto the screw terminals (it does not matter which white wire goes to the transformer terminal and which goes to the doorbell terminal). Tighten the screws.
- Using a crimp tool and the wire connectors provided, connect the wires that were set aside to the straight gray wires of the power module.
- Afix the power module to the side of the chime using the included adhesive. Replace the chime cover.
Connect the Video Doorbell to the network
AP Mode (recommended)
- The camera is in Access Point (AP) mode when the button LED is blinking white. If necessary, access AP mode by holding down the doorbell button for 45-50s and release when the LED turns to blinking white.
- Using a Wi-Fi-capable device (e.g., smartphone or computer), find and connect to the camera’s network; the SSID should have the format ADC-VDB770 (XX:YY:ZZ) where XX:YY:ZZ is the last 6 characters of the MAC address, which is printed on the included reference card.
- On the same device, open a web browser and enter http://vdb770install in the web address field. Follow the on-screen instructions to add the ADC-VDB770 to the Wi-Fi network. Verify the LED turns solid green, indicating the connection is complete.
WPS Mode (alternate)
Use WPS mode if you have easy access to the Wi-Fi router and the router has the WPS feature enabled. Note that some Internet Service Providers disable the WPS feature on customer routers. AP mode is the most reliable method for installing this device.
- After the boot process is complete (the camera’s LED will be blinking white), hold down the doorbell button for 30-35s and release when the LED begins to blink blue.
- Activate WPS Mode on the router. The doorbell will begin to connect to the Wi-Fi network. Verify the LED turns to solid green, indicating the connection is complete.
Enroll the Video Doorbell to the account
- Add the device to the account by selecting the account in MobileTech, by using the customer Mobile App, or by using a web browser and entering the following web address: www.alarm.com/addcamera.
- Select the Video Doorbell from the video device list or enter in its MAC address to begin adding the device. The device’s MAC address is located on the included reference card.
- Follow the on-screen instructions to finish adding the device.
| Button push duration |
LED pattern |
On button release |
| 0-30s |
No change (current state) |
None |
| 30-45s |
Blinking Blue |
Enter WPS Mode |
| 45-60s |
Blinking White |
Enter AP Mode |
| 60-75s |
Blinking Yellow |
Power Cycle |
| >75s |
Green/Red Alternating |
Factory Reset |
Note: If the indoor chime is enabled for the device, holding down the button will trigger a single indoor chime immediately after being pressed. If desired, the indoor chime can be disabled through the Customer Website before pressing the button to initiate one of the above modes.
Troubleshooting
- If there are issues connecting the Video Doorbell to the account, power cycle the camera by holding down the doorbell button until the LED starts blinking yellow (~60-75s) and then releasing the button. After the device reboots, try connecting again.
- If issues persist, factory reset the Video Doorbell by pressing and holding the doorbell button until the LED starts blinking red and green (~75s). The device will reboot with factory defaults.
Important: If the device was previously installed to an Alarm.com account, it will need to be deleted before it can be installed again.
If the mounting bracket needs to be replaced with a different angled variety to improve the field of view, uninstall the backplate, replace the mounting bracket (while leaving the wires connected), and reinstall the backplate to the new mounting bracket.
 | Loading… |
 WARNING: This product contains chemicals including Styrene which is known to the state of California to cause cancer, and Bisphenol A (BPA), which is known to the state of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
In certain instances promotional prices will be offered listed above as a “Price with Rebate”, and are typically dated. In these cases Instant Rebate (IR) pricing is good sometimes only for the day only or only for the week. In order to be eligible for IR pricing – the order must be paid for AND picked up/shipped out. If you are placing an online order outside of business hours within your respective time zone, please add a note to your order for the team to confirm the pricing, or contact the branch the following business day to ensure that the item pricing carries over into the subsequent period. If an alternate branch location is still open in another time zone, please reach out to that group.
|