IR Manager for 2G and 2G+

This is the first IR Accessory offered for the 2G and 2G+ implementation of HDMI® over IP applications.  The IR MANAGER device has an IR memory and the ability to "learn" 32 commands for each Blaster port (128 IR commands total).  The 4 IR Blaster ports can be addressed individually.  For example, you can tell the box to send a command out to IR Blaster 4, and the other 3 IR Blasters will remain "dark", until they are also addressed.  The "learned" IR commands are stored in flash memory on the primary IC and will not be lost if there is a power outage.  The IR Memory can be copied and pasted between IR managers - single commands or complete blocks. This unit is a programmable learning remote controller that connects to any 2G/2G+ device via RS232. IR Manager is a great alternative for situations where CEC or RS232 control of the attached device is not an option.

• 1 * RS232 port for control (can easily be attached to any 2G or 2G+ Transmitter or Receiver)
• 1 * IR Learning Eye on the front (other companies sell a learning eye as an add on)
• 4 * IR Blaster 3.5 mm ports on the back that are addressed discretely – providing total control (IR Blasters can be extended 200' or longer with 3.5mm stereo extension cords)
• 4 * IR Blasters included to connect to the 3.5mm ports with adhesive pads 
• 4 * IR Confirmation LED's on the front that "flash" when learning or sending (flashing LED’s can be disabled by the installer)
• DC5V 1.5A positive tip power supply
• Major Control System Drivers Available
• Easy integrated control from any 2G or 2G+ command console

See Platform Diferences HERE

Just Add Power - Video Wall Demo

 

Videowall and Instant Switching