800-795-5111

Home

N-CORE CLASS D AMPLIFIER 200W X 8 3RU

Other products by	Amplifier Technologies
	(Tech Support Website)

Item #:

AT528NC

MSRP:

$4,595.00

Description
Description

AT528NC | CLASS D AMPLIFIER MODELS

Designed and built around the musical and highly efficient Hypex N-Core® amplifier technology, the AT52XNC model amplifiers deliver a robust 200 watts of power per channel. Each amplifier channel employs one N-Core® module to drive the loudspeaker and deliver sonic impact to the presentation. Available in 7 models from 2 to 8 channels, the AT52XNC Series offers efficient amplifier performance and value. High current toroidal transformers, a standard for all ATI power amplifiers, provide clean power and stable performance.

The AT500NC Series amplifiers have been designed to be compact and efficient while still providing high power for more demanding multi-channel listening environments. The AT52XNC model amplifiers employ Hypex N-Core® amplifier modules combined with an ATI designed custom gain stage and linear power supply. Each amplifier channel produces 200 watts of output power into 8 ohm loudspeakers and 300 watts into 4 ohm loudspeakers.

Around the back of the amplifier, each channel has an RCA unbalanced input, an XLR Balanced input, input selection switch and a pair of gold-plated, 5-way binding posts for the outputs.

There is also a 1/8” mono mini jack for +12V trigger, a gold-plated chassis ground lug, a fuse holder and an IEC 20 Amp inlet for the provided detachable power cord. The supplied power cord will have either: a NEMA 5-15 plug (Type B) for use in the USA, a BS 1363 (Type G) plug for use in the UK, or a Schuko (Type F) plug for use in the EU and the rest of the world.

FEATURES:

Remote Trigger: Activated from 3.3VDC to 24 VDC via a heavy-duty relay

Protection Circuits: Optically - coupled with full automatic reset.

Toroid Transformers: 40% more efficient than EI type. Each transformer has two bi-filar windings to assure low noise and crosstalk.

Circuit Boards: Double-sided, FR-4 glass-epoxy, computer-grade boards are assembled in-house.

Soft Start Circuitry:

New micro-processor controlled turn-on board first ascertains input voltage and configures transformers for 120V or 230V operation then ultra soft turn-on timers reduce in-rush current to a minimum. Multiple units can be turned on withouttripping circuit breakers eliminating the need for sequencing.

Amplifier Output: Hypex N-Core NC-500 Class D amplifier modules with ATI's custom input buffer insures edge-of-the-art operation.

Power Cord: 20A IEC power inlet with detachable, 3-wire cord.

Dimensions:

Two to four channel models: 17"W X 5 3/4"H X 10 5/8"D
Five to eight channel models: 17"W X 5 3/4"H x 15 1/2"D

Weight: 39 to 62 1/2 lbs (model dependent)

SPECIFICATIONS

Number of Channels: 5-8

EIA 1kHz Output Power at 8Ω*: 250 watts

EIA 1kHz Output Power at 4Ω*: 375 watts

FTC Full Bandwidth Output Power at 8Ω**: 200 watts

FTC Full Bandwidth Output Power at 4Ω**: 300 watts

Input Sensitivity for Full Rated Output: 1.6 volts

Frequency Response: +0,-.5dB20-20kHz

Damping Factor: >5000

Crosstalk: Greater than 100 dB from 20 Hz—20 kHz

Voltage Gain through RCA Jacks: 27.8 dB

Voltage Gain through XLR Jacks: 27.8 dB

Slew Rate: >60V/µSec

Input Impedance: 47 kΩ

DC Output Offset: Less than ± 10mV

Power Requirements: 120/230VAC

Chassis Dimensions (W x H x D) Inches: 17x5 3/4x10 5 1/2

Chassis Dimensions (W x H x D) millimeters: 432x146x394

Net Weight (lbs/kg) Model Dependent: 39-64 1/2/17.8-29.8

Shipping Weight (lbs/kg) Model Dependent: 49-75 1/2 22.3-34.4

Prop 65 WARNING: This product contains chemicals including Styrene which is known to the state of California to cause cancer, and Bisphenol A (BPA), which is known to the state of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

In certain instances promotional prices will be offered listed above as a “Price with Rebate”, and are typically dated. In these cases Instant Rebate (IR) pricing is good sometimes only for the day only or only for the week. In order to be eligible for IR pricing – the order must be paid for AND picked up/shipped out. If you are placing an online order outside of business hours within your respective time zone, please add a note to your order for the team to confirm the pricing, or contact the branch the following business day to ensure that the item pricing carries over into the subsequent period. If an alternate branch location is still open in another time zone, please reach out to that group.

New Project

Name:

Print Project

Image:

MSRP:

Custom Items:

PrintProject

Volutone

AT528NC | CLASS D AMPLIFIER MODELS

Other Items In This Category