Search:
  800-795-5111  

Other products by Wyrestorm
(Website Link)



Item #: EX70H2
MSRP: $749.00
Login


HDBaseT 4K UHD Extender Set with 2-way PoH and Bidirectional IR & RS-232 (4K: 70m/230ft | 1080p: 100m/328ft)

 

 

Featuring powerful Class A HDBaseT transmission, the EX-70-H2 is intended for use in any environment where 4K Ultra HD and HDR content and control is required over an extended distances up to 70m/230ft using Cat6 cable.


Featuring an enhanced chipset to ensure compatibility with current and future UHD source devices, including those outputting 4K HDR content, the EX-70-H2 offers full compatibility with the latest UltraHD content and HDMI 2.0 video standards for transmission up to 4K UHD @30hz 4:4:4 24bit and 4K HDR @24Hz 4:2:0 10bit (BT.2020).



Supporting distribution of 4K UHD video, 2ch PCM audio and multichannel support for up to 7.1, DTS-X and Dolby Atmos, bidirectional IR and RS-232, the EX-70-H2 also features 2-way PoH to enable the extender to be remotely powered from either TX or RX for ultimate convenience and ease of installation. Furthermore, with a compact chassis of just 17mm, the EX-70-H2 is designed with discreet and flexible placement in mind behind even the slimmest wall mount.

 

Designed specifically to meet demand for the latest 4K UltraHD content, source and display devices in any residential or commercial setting, the EX-70-H2 is a Class A HDBaseT extender solution with full HDR support distributing 4K UHD HDR and 1080p video, audio, bidirectional IR/RS-232 and two-way PoH to remotely power either transmitter or receiver.

 

 

Features:


-4K UltraHD extender set capable of transmitting AV content over long distances using single cable Cat6 cable
-Robust HDBaseT Class A transmission of 4K HDR up to 70m/230ft and 1080p @60Hz 48bit up to 100m/328ft
-Full UHD 4K transmission supporting HDMI 2.0 video standards
-Supports all high definition resolutions up to an including 4K UHD @30hz 4:4:4 24bit | 4K HDR @24Hz 4:2:0 10bit (BT.2020) - see specification tab for full details
-Revised chipset increases compatibility with new 4K UHD source devices
-Transmits discreet wide-band two-way IR control signal / serial control commands together within HDMI signal over a single Cat5e/6
-Low profile chassis of 17mm for easier, more convenient installations behind screens at display zones.
-Two-way PoH (Power over HDBaseT) enables either transmitter or receiver to be remotely powered by the other locally powered so mains power connectivity is not required at both source and display location
-2ch PCM audio and multichannel HD audio supports 7.1, DTS-X and Dolby Atmos
-HDCP 2.2 compliant
-3D compatible
-Switchable RS-232 function mode on transmitter and receiver for firmware update
-Note: Serial control via RS-232 only supported when connected to a compatible HDBaseT transmission device with routable RS-232.
-Threaded bushings on allow use of both standard and locking 18v DC power plugs
-Visual LED indication for power supply to units, signal status to show established display connection, HDCP presence in signal and HDBaseT link between devices
-Cable termination follows IEEE-568B standards
-Automatically adjusts feedback, equalization and amplification of signal for easy installation
-Energy efficient universal power supply included



New Project

Volutone