SPA2-200
For higher power the SPA2-200 two channel amplifier delivers up to 200 watts rms per channel into 4 or 8 ohms; the two channels can also be bridged providing up to 400 watts rms into 4 or 8 ohms. When the channels are bridged they can be switched into 70V or 100V direct drive mode providing up to 350 watts rms into a mono 70V or 100V output. Like the other SPA models, an 80Hz highpass filter is engaged when in 70V or 100V mode.
Features
- Up to 200 watts per channel into 4 and 8 ohms — the outputs of the SPA2-200 model are designed to provide up to 200 watts per channel into Low-Z loads.
- ENERGY STAR® qualified amplifier — The ENERGY STAR qualified SPA amplifiers employ an efficient class-D design to conserve energy and reduce operational cost.
- Bridgeable outputs for higher power — Bridging the outputs of the SPA2-200 will deliver up to 350 watts into 70V or 100V when bridged.
- Auto-Ramp provides quiet startup and power-down — The ENERGY STAR auto-ramp circuitry ensures quiet and fast power up from standby and seamless power-down following 25 minutes of inactivity, dramatically reducing power consumption.
- Rack-mountable 1U, half rack width enclosure — The SPA amplifers can be mounted in 1 RU, 1/2 rack space, and their clever joining brackets enable easy under-table and wall-mounting
| SPECIFICATIONS |
|
|
SPA2-200 |
|
| Stereo Mode Watts Per Channel |
| 8Ω dynamic, both channels driven |
|
|
200 W |
|
| 4Ω dynamic, both channels driven |
|
|
200 W |
|
| Bridged Mode, watts per channel |
| 8Ω & 4Ω |
|
|
400 W |
|
70V & 100v |
|
|
350 W |
|
Signal to Noise (A weighted, 20 Hz-20 kHz) |
|
|
>100 dB |
|
Input Sensitivity |
|
|
1.23 Vrms (+4 dBu) |
|
Maximum Voltage Gain |
|
|
25.0 dB |
|
Ouput Circuitry |
|
|
Class D |
|
Frequency Response (20 Hz - 20 kHz) |
Frequency Response (20 Hz - 20 kHz) |
Input Impedance |
>10 kΩ (balanced), >10 kΩ (unbalanced) |
Maximum Input Level |
12.3V (+24 dBu) |
Highpass Filter |
Switchable 80 Hz when Bridged in 70V & 100V |
Front Panel Indicators |
Power, per channel Signal, per channel Protect/Limit |
Controls |
4Ω/8Ω/70V Bridge Highpass On/100V Bridged Highpass On per channel pair |
Dimensions (HWD) inches |
1.7 x 8.7 x 9.5 / 1RU |
Dimensions (HWD) mm |
43 x 220 x 241 / 1RU |
Weight (Net) |
|
|
4.0 lb / 1.4 kg |
|
Weight (Shipping) |
|
|
6.5 lb / 2.5 kg |
|
Agency Approvals |
UL, CE, ENERGY STAR, RoHS/WEEE compliant, FCC Class B (Conducted and Radiated emissions), UL 2043 witd PL-Kit |
Carton Contents |
Power cable, quick start guide, connector kit, rack mount ears, mounting brackets |
 | Loading… |
 WARNING: This product contains chemicals including Styrene which is known to the state of California to cause cancer, and Bisphenol A (BPA), which is known to the state of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
In certain instances promotional prices will be offered listed above as a “Price with Rebate”, and are typically dated. In these cases Instant Rebate (IR) pricing is good sometimes only for the day only or only for the week. In order to be eligible for IR pricing – the order must be paid for AND picked up/shipped out. If you are placing an online order outside of business hours within your respective time zone, please add a note to your order for the team to confirm the pricing, or contact the branch the following business day to ensure that the item pricing carries over into the subsequent period. If an alternate branch location is still open in another time zone, please reach out to that group.
|