MP-A80V
Multi-Channel Amplifier
The MP-A Series music and paging amplifiers build on a 50-year legacy of QSC amplifier dependability and quality. The MP-A Series offers an incredible amount of flexibility for business music and paging applications, while maintaining high efficiency and low total cost of ownership.
Features
- FlexAmp Technology allows each pair of amplifier channels to deliver up to 400 W total power, in any ratio
- Class-D output circuitry and switchmode power supply for high efficiency and low cost of ownership
- 1RU amplifier design for rack space savings
- Load selector for driving 4 Ω, 8 Ω, 70 V or 100 V on each channel
- Selectable 80 Hz highpass filter offered on each channel
- Power saving features - Auto-standby (after 28 minutes with seamless auto-ramp when signal returns) and remote standby input
- Amp status remote output
- Rock-solid QSC amplifier dependability
| pecifications |
MP-A20V |
MP-A40V |
MP-A80V |
| Channels |
2 |
4 |
8 |
Power (all channels driven)
8 Ω
4 Ω
70 V
100 V |
200 W
200 W
200 W
200 W
|
200 W
200 W
200 W
200 W
|
200 W
200 W
200 W
200 W
|
| FlexAmp Technology |
400 W for a pair of adjacent channels
(1-2, 3-4, 5-6, 7-8) |
| Frequency Response |
20 Hz – 20 kHz +/- 0.5 dB |
| Signal to Noise |
> 103 dB |
| Input sensitivity |
1.23 V (+4 dBu) |
| Gain at 8 Ω |
30.0 dB |
| Output circuitry |
Class D |
| Input impedance |
>10k, balanced or unbalanced |
| Maximum input level |
12.3 V (+24 dBu) |
Cooling
Type
Operating temperature range |
Forced air cooling:
Maximum: -10° - 50° C, recommended: 0° - 35° C, reduced performance above 40° C
|
Connectors
Input connectors
Remote connectors
Output connectors |
Two 3.5mm Euro, 3-pin (green)
One 3.5mm Euro, 5-pin (black)
One 5.0mm Euro, 4-pin (green) |
Four 3.5mm Euro, 3-pin (green)
One 3.5mm Euro, 5-pin (black)
Two 5.0mm Euro, 4-pin (green) |
Eight 3.5mm Euro, 3-pin (green)
One 3.5mm Euro, 5-pin (black)
Four 5.0mm Euro, 4-pin (green) |
| Front panel indicators |
Power, signal (per channel), limit / mute / protect (per channel) |
| Rear panel indicators |
Bi-Color LED signal / limit/ mute/ protect |
User-configurable operating
modes (per channel) |
DIP switch selectable, low impedance 4 Ω or 8 Ω,
high impedance direct drive 70 V or 100 V |
| Remote I/O |
Remote standby, amplifier status enunciation on 3.5 mm connectors |
| Highpass filter |
80 Hz DIP switch engaged per channel |
| Dimensions |
1.75 in x 19 in x 13.6 in (44 mm x 483 mm x 345 mm) |
| Net weight |
7.7 lb (3.5 kg) |
9.3 lb (4.2 kg) |
12.8 lb (5.8 kg) |
| Shipping weight |
12.3 lb (5.6 kg) |
13.9 lb (6.3 kg) |
17.4 lb (7.9 kg) |
| Power requirements |
Universal power supply (with active power factor correction),
100 – 240 VAC, 50 -60 Hz |
| Agency approvals |
UL, CE, RoHS/WEEE compliant,
FCC class B (conducted and radiated emissions) |
| Carton contents |
IEC cable, quick start guide, connector pack |
 | Loading… |
 WARNING: This product contains chemicals including Styrene which is known to the state of California to cause cancer, and Bisphenol A (BPA), which is known to the state of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
In certain instances promotional prices will be offered listed above as a “Price with Rebate”, and are typically dated. In these cases Instant Rebate (IR) pricing is good sometimes only for the day only or only for the week. In order to be eligible for IR pricing – the order must be paid for AND picked up/shipped out. If you are placing an online order outside of business hours within your respective time zone, please add a note to your order for the team to confirm the pricing, or contact the branch the following business day to ensure that the item pricing carries over into the subsequent period. If an alternate branch location is still open in another time zone, please reach out to that group.
|