4K/UHD HDMI Over 100 M HDBaseT Receiver with Ethernet, Control, and PoE
AT-UHD-EX-100CE-RX
- 4K/UHD capability @ 60 Hz with 4:2:0 chroma subsampling
- HDCP 2.2 compliant
- Supports 4K HDR10 @ 24 Hz (4:2:0 chroma subsampling, 10-bit color)
- HDBaseTTM receiver for HDMI®, Ethernet, power, and control up to 330 feet (100 meters)
- Remotely powered via PoE (Power over Ethernet)
- Receives RS-232, IR, CEC, and Ethernet control signals over HDBaseT
- Multi-channel audio compliant for all PCM, Dolby®, and DTS® formats
Learn more about Atlona’s 4K HDR integration products for residential and commercial applications.
ATLONA UHD-EX SERIES
The AT-UHD-EX-100CE-RX is part of the Atlona UHD-EX Series of HDBaseT extenders. See below for a complete listing of transmitters, receivers, and extender kits.
The Atlona AT-UHD-EX-100CE-RX is a 4K/UHD HDMI over 100M HDBaseT receiver for AV signals up to 330 feet (100 meters) over category cable with Ethernet pass through, RS-232 and IR control, plus Power over Ethernet. It is compatible with signals up to 4K/UHD @ 60Hz with embedded multi-channel audio and remote 48V power for the receiver. The AT-UHD-EX-100CE-RX is HDCP 2.2 compliant and supports EDID communication. The receiver features a quarter rack width metal enclosure for installation with rear panel I/O ports for uncluttered wire management. Use with an optional AT-IR-CS-RX IR receiver cable to capture IR remote commands for AV system control.
This receiver is used in commercial and applications that call for an HDBaseT receiver with a compact form factor that allows for simple mounting behind displays and at projectors. These applications will not require an AC outlet for the receiver, since the receiver is powered by the Atlona switching product. This receiver will also be used to simplify control of the AV system by working with 12 volt-based IR receivers as well as passing through Ethernet and RS-232 commands.
PRODUCT COMPATIBILITY
The AT-UHD-EX-100CE-RX is compatible with the AT-UHD-EX-100CE-TX transmitter, as well as Atlona switchers, matrix switchers, and distribution amplifiers with HDBaseT outputs. See below for a list of compatible products.
NOTE: Ethernet pass-through is not available with AT-UHD-EX-100CE-RX receivers connected to UHD-PRO3 Series matrix switchers. More information is available in the Atlona Help Center.
| Resolution |
| Video |
4096×2160@24/25/30/50*/60Hz*, 3840×2160@24/25/30/50*/60Hz*, 2048x1080p, [email protected]/24/25/29.97/30/50/59.94/60Hz, 1080i@50/59.94/60Hz, 720p@50/59.94/60Hz, 576p, 576i, 480p, 480i |
| VESA |
2560×2048, 2560×1600, 2048×1536, 1920×1200, 1680×1050, 1600×1200, 1600×900, 1440×900, 1400×1050, 1366×768, 1360×768, 1280×1024, 1280×800 1280×768, 1152×768, 1024×768, 800×600, 640×480 |
| Colorspace |
YCbCr, RGB |
| Chroma Subsampling |
4:4:4, 4:2:2, 4:2:0 |
| Color Depth |
8-bit, 10-bit, 12-bit |
| HDR |
4K HDR10 @ 24Hz, 4:2:0 chroma subsampling, 10-bit color
(Source signal delivered from Ultra HD Blu-ray as 4K @ 24Hz 4:2:2. Not compatible with HDR10 @ 60Hz.) |
| Audio |
| Formats |
PCM 2Ch, LPCM 5.1, LPCM 7.1, Dolby Digital, DTS 5.1, Dolby Digital+, Dolby TrueHD, DTS-HD Master Audio, Dolby Atmos, DTS:X |
| Sample Rate |
32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz |
| Bit Rate |
up to 24-bit |
| Distance |
| CAT5e/6 @ 4K |
up to 70 meters |
up to 230 feet |
| CAT6a/7 @ 4K |
up to 100 meters |
up to 328 feet |
| CAT5e/6 @ 1080p |
up to 100 meters |
up to 328 feet |
| HDMI IN/OUT @ 4K |
up to 5 meters |
up to 15 feet |
| HDMI IN/OUT @ 1080p |
up to 10 meters |
up to 30 feet |
| Signal |
| Bandwidth |
10.2 Gbps |
| CEC |
Pass through |
| HDCP |
Supports up to 2.2 |
| Connector |
| Firmware |
Mini-B USB |
| HDBaseT |
RJ45 (8P8C) |
| HDMI |
Type A |
| LAN |
RJ45 (8P8C), Ethernet pass through |
| IR |
5-pin captive screw |
| RS-232 |
3-pin captive screw |
| Power |
2-pin, 48V captive screw |
| Temperature |
| Operating |
0°C to 50°C |
32°F to 122°F |
| Storage |
-20°C to 60°C |
-4°F to 140°F |
| Humidity |
20 to 90% non-condensing |
| Power |
| Consumption |
12W |
| Supply |
Input: AC100~240V 50/60Hz
Output: DC 48V/0.83A |
| Dimension |
| H x W x D |
25 x 109 x 89 (mm) |
0.98 x 4.29 x 3.50 (inch) |
| w/ears |
27 x 119 x 89 (mm) |
1.06 x 4.69 x 3.50 (inch) |
| Weight |
| Unit |
0.39kg |
0.86lbs |
| Certification |
| Power Supply |
CE, FCC, RoHS, cULus, RCM, CCC |
| Product |
CE, FCC |
* 4096×2160@50/60Hz & 3840×2160@50/60Hz supported @ chroma subsampling 4:2:0 8-bit only
 | Loading… |
 WARNING: This product contains chemicals including Styrene which is known to the state of California to cause cancer, and Bisphenol A (BPA), which is known to the state of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
In certain instances promotional prices will be offered listed above as a “Price with Rebate”, and are typically dated. In these cases Instant Rebate (IR) pricing is good sometimes only for the day only or only for the week. In order to be eligible for IR pricing – the order must be paid for AND picked up/shipped out. If you are placing an online order outside of business hours within your respective time zone, please add a note to your order for the team to confirm the pricing, or contact the branch the following business day to ensure that the item pricing carries over into the subsequent period. If an alternate branch location is still open in another time zone, please reach out to that group.
|