unDX2IO+WU White Finish/UPD 3rd PartyControl Compatible

Dante Networked Audio Wall Plate - 4x2 Mic/Line I/O (2 Mic)

SUMMARY - A 2-in, 2-out I/O Interface that is a convenient, cost-effective way to

add up to two channels (in and out) of Dante audio to an existing Dante-based networked audio system.

INPUTS & OUTPUTS - XLR balanced audio inputs and outputs, switchable mic/line gain and switchable phantom power on the inputs. An additional 2 Balanced line inputs are accessible on side of unit for use with a companion unXP2I passive expansion plate.

CONTROL - Audio flow assignment, input gain and phantom power are all controllable via the Dante network connection.

Firmware Compatibility Note: Two versions of firmware are available for this product that each support a different control method.

FEATURES AND BENEFITS

 Small form factor, can be unobtrusively located near analog sources or sinks

 Four input gains to accommodate common line levels, dynam‐ ic, and phantom powered mics

 +48V phantom power per channel - powers all types of phan‐ tom powered microphones typically used in installed AV systems

 Analog output gain is software adjustable between 0dB and –60dB plus mute to accommodate all types of line input audio equipment—both consumer and pro levels

 Industry standard +20dBu maximum input levels (at 0dB input gain) and +20dBu maximum output levels

 Uses standard IEEE 802.3af PoE power

 Full Dante system status LEDs on the front panel

APPLICATIONS

 Easily accessible microphone audio interface for presentation audio systems in meeting spaces, classrooms, theaters and hospitality venues.

 House of worship DanteTM connectivity for musicians and wor‐ ship leaders

 Conveniently located audio network I/O for portable AV sys‐ tems in convention spaces and hospitality venues

SPECIFICATIONS

Mic/Line Input Type: Balanced and RF filtered XLR

Phantom Power: +48V, software selectable

Mic/Line Gain: -15dB (pad active), 0dB, +25dB, +40dB, software selectable

Input Impedance: >1.8K ohms at any gain setting

Equivalent Input Noise: -115dBu (+40dB gain)

Maximum Input Levels: +20dBu @ 0dB gain (pad active), +5dBu @ 0dB gain, -22dBu @ +25dB gain, -38dBu @ +40dB gain

Side Line Input Type: Balanced and RF filtered 3-pin depluggable, with software selectable pro or consumer input sensitivity

Output Type: Balanced line level on XLR. with automatic muting on loss of Dante signal

Output Gain: 0dB to –60dB plus mute, software selectable

Output Noise: <-85dBu @ 0dB gain

Maximum Output Level: +20dBu (@ 0dB output gain)

System THD: <.05% at any gain, input signal 3dB below maximum

PoE Class: Class 0 802.3af PoE PD compliant

Certifications: FCC 47CFR Parts 15B and 18 (Class A), EN 55011, ICES-003, CE (EN55022 Class A and EN55024 Class A)

Dimensions: 3.54” W x 4.2” H x 1.88” D

Operating Temperature: 0°C ‐ 40°C