Other products by ClearOne
(Tech Support Website)

MSRP: No Retail

Ceiling Microphone Arrays

The richest sounding tri-element ceiling microphone arrays in the industry.

An advanced tri-element Dante ceiling microphone array with superior sound quality and adjustability for desired height.

A built-in Dante audio networking interface, supports daisy-chain options for conferencing, sound reinforcement and audio-distribution applications.

Key Highlights:

  • Most competitively-prices, "steerable" tri-element hanging mic arrays with digital Dante™ interface.
  • New Significantly wider coverage area than original ClearOne CMA for larger spaces, coveringsystem covering up to 4 rooms with a single CMA system.
  • Arrays offer superior audio quality with wide bandwidth & low noise, optimized for speech-intelligibility.
  • Gets microphones “off the table” area while maintaining speech quality and intelligibility required for successful conferences.
  • At just 1.5” x 3”, it is the smallest & most unobtrusive multi-element microphone array
  • “Pre-integrated” to work seamlessly with ClearOne Audio & Video products; while also compatible with other professional systems
  • Plenum-rated for flexible placement options.
  • Multicolor LED indicators on every mic element for system status.
  • Numbered Mic elements for ease of set-up, management & troubleshooting.
  • Completely adjustable drop-down cable- between 0 and 7 feet to match most room environments.
  • Robustly Shielded against RF & Electrical interferences.
  • Attractive Capsules offered in Black or White to compliment most room environments .

Acoustic Characteristics:

  • Element: Condenser (Electret)
  • Polar Pattern: 3 X 120° Cardioid Patterns, covering 360°
  • Signal/Noise Ratio: 74 dBA @ 1 kHz
  • Frequency Response: 70 Hz – 20 kHz
  • Sensitivity: -37dB @ 1 kHz (0 dB = 1V / Pa)
  • Max Sound Pressure Level: 120 dB SPL
  • RF Immunity: 100% immunity, fully balanced twisted pair throughout

Power & Thermal:

  • Power Type: PoE
  • Port Type: RJ-45
  • Power Source: PoE power injector, PoE Ethernet Network Switch
  • PoE In: IEEE 802.3af CLASS III, Mode A or B Modes A and B refer to whether power can be supplied over data pairs in the CAT5 cable. Mode A means power can be supplied by either spare or data pairs, and Mode B means power can only be supplied by spare pair
  • Mains Voltage: 100-240V AC, 50/60Hz
  • Impedance: 200 Ω
  • Power Consumption: 8.5 Watts Typical with 4 Mic Capsules
  • Operating Temperature: 41º to 104º F (5º to 40º C)


  • Dimensions (W x D x H)

    - Mic Capsule: 1.7" x 1.7" x 86.6" (42 mm x 42 mm x 2200 mm)
    - Digital Dante Interface: 6.8" x 6.7" x 1.7" (172 mm x 169 mm x 43 mm)
    - Digital Junction: 4" x 3.7" x 1.4" (102 mm x 93 mm x 35 mm)

  • Weight

    - Mic Capsule: 6 oz (170 g)
    - Digital Dante Interface: 21.6 oz (612 g)
    - Digital Junction: 7.2 oz (204 g)

MIC Array: Available Colors

  • White or Black


Prop 65WARNING: This product contains chemicals including Styrene which is known to the state of California to cause cancer, and Bisphenol A (BPA), which is known to the state of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

New Project

Print Project