DSC-PC4204 4 Output Power Supply for PC4020

If you need additional power for devices for your MAXSYS system then the DSC PC4204 is just what you're looking for. This is a dual purpose device because not only does it supply extra power for devices, but it also has relay outputs that you can use to control external devices.

Specs:

• Current Draw: 30 mA (from Combus)
• Minimum 40VA 16-18V transformer required
• Minimum 4Ah battery required
• Connects to control panel via 4-wire Combus
• Four programmable relay contacts rated 2A, 30VDC
• AUX current: 1.0A max.
• Tamper contact input

Features:

-Includes 4 fully programmable high current relays with Form'C'
contacts rated 2A @ 30VDC

-Provides 1A @ 12VDC to power direct connected devices or repower
the Combus (uses relay #1 when repowering Combus)

-Connect up to 16 modules per system for 64 relays total

-Each relay programmable to activate for any of 59 options

-Complete with supervised battery charger : 12VDC, 350mA charging
current for sealed lead-acid rechargeable batteries

-Fully supervised for low battery, and aux supply and
AC power loss

-Connection for external tamper… supervised by system

-Connect up to 1,000' (305m) from control panel via COMBUS