800-795-5111
 

Other products by Episode
(Tech Support Website)

View Accessories

Item #: ESSUBWIRELESSKIT
MSRP: No Retail
Login


Episode® Wireless Subwoofer Kit

Do you have a system that wasn't pre-wired for a subwoofer, or a wire that’s in the wrong spot? No need to worry –just go wireless. With the Episode® Wireless Subwoofer Kit, you can easily install up to 4 subwoofers anywhere in the room, and even pair multiple subs to the same transmitter using optional Episode receivers. Now you can customize your installation and tailor the sound field for any area without spending countless hours wiring it.

 

 

Easy Placement

Easy Placement

With this kit, it’s easier than ever to place the subwoofer in the sweet spot. Relocate the sub to anywhere there’s an electrical outlet to achieve the best sound possible. Plus, a compact form factor keeps the transmitter and receiver out of sight. For a quick tutorial on optimum subwoofer placement, check out our video in the Video tab.

Sync Abilty

Sync Ability

Sync up to 4 receivers to a single transmitter using Easy SYNC technology. After powering up each device, simply press and hold the SYNC button once on each end. The two will automatically connect to each other – and more importantly – stay that way, even if the power goes out.

 

Reduced Interference

This kit utilizes a less-congested 5GHz transmission with frequency hopping (FSK) for decreased interference and latency. This high-frequency technology is similar to those used in professional and live concert venues, so it’s more immune than traditional consumer products to Wi-Fi signals, microwave ovens, and other RF devices.

Extended Range

With a delay of less than 20 milliseconds, subwoofer signals are instantly transmitted and reproduced. Plus, our engineers have verified the system integrity to up to 30 feet.

Frequency Shift Keying

FSK, or frequency hopping, adds another layer of reliability by automatically finding open frequencies to communicate. If interference is found on one channel, it simply “hops” to an available one.

 

Color
  Black
Connectors
  RCA
Range
  30 ft. max (10m)
Signal to Noise Ratio
  84 dB
Frequency Range
  10 Hz - 900 Hz
Operating Frequencies
  5200 - 5800 MHz
Channel Width
  < 22 MHz
Modulation
  5 GHz Frequency Hopping; QPSK (DSSS) digital radio
Latency
  < 20 ms
Max Input Signal (LFE)
  1.84V
Dimensions (W x H x D)
  Transmitter: 3.54” x 1.32” x 3.35”
Receiver: 2.20” x 1.12” x 3.35”

 

 

2-Year Limited Warranty

This Episode® Speaker product has a 2-Year Limited Warranty. This warranty includes parts and labor repairs on all components found to be defective in material or workmanship under normal conditions of use. This warranty shall not apply to products which have been abused, modified or disassembled. Products to be repaired under this warranty must be returned to SnapAV or a designated service center with prior notification and an assigned return authorization number (RA).

 



Prop 65WARNING: This product contains chemicals including Styrene which is known to the state of California to cause cancer, and Bisphenol A (BPA), which is known to the state of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.



In certain instances promotional prices will be offered listed above as a “Price with Rebate”, and are typically dated. In these cases Instant Rebate (IR) pricing is good sometimes only for the day only or only for the week. In order to be eligible for IR pricing – the order must be paid for AND picked up/shipped out. If you are placing an online order outside of business hours within your respective time zone, please add a note to your order for the team to confirm the pricing, or contact the branch the following business day to ensure that the item pricing carries over into the subsequent period. If an alternate branch location is still open in another time zone, please reach out to that group.


New Project

Print Project

PrintProject

Volutone