PARA-JC3P-SL | Parasound Halo Series JC 3+ Phono Preamplifier - Silver
Parasound Halo Series JC 3+ Phono Preamplifier
Halo is Parasound’s premier line with a reputation for going head-to-head with the most expensive equipment on the market, while costing a fraction of the price.
Power Consumption |
Standby: 1W
Power On: 12W
115 or 230 VAC 50 - 60 Hz
(Selected on Chassis Bottom) |
|
Frequency Response |
|
Audio Crosstalk |
72dB at 1kHz |
Impedance Input |
MM: 47kΩ
MC: 50 - 550Ω variable, 47kΩ fixed |
Sensitivity Input |
200 mV for 1 V output
Total Gain: 14 dB
Maximum Output: 8 V |
Signal to Noise Ratio |
MM:
> 87dB, input shorted, IHF A-weighted
> 78dB, input shorted, unweighted
MC:
> 87 dB, input shorted, IHF A-weighted
> 67 dB, input shorted, unweighted |
External Trigger Voltage |
+9 Vdc to +12 Vdc, 5 mA |
Connectors |
XLR Pin Identification
1 = Ground (Shield)
2 = Positive
3 = Negative (Return) |
Dimensions (W x H x D) |
17.25" x 3.55" x 13.75" (438 x 89 x 350mm) (without feet)
17.25" x 4.13" x 16" (438 x 105 x 350mm) (with feet) |
Weight |
Net Weight: 19 lbs (8.6 kg)
Shipping Weight: 26 lbs (11.8 kg) |
Halo has earned honors and awards that are unmatched. The Parasound Halo JC 3+ is a High-Performance Dual-Mono Phono Preamplifier built with the highest quality parts, solid construction, and a very clean design. Like all Phono Preamplifiers, the JC 3+ must multiply the tiny audio signal generated by a high-end low-output moving coil (MC) or moving magnet (MM) phonograph cartridge and make it strong enough to deliver to the input of a line level preamplifier. Parasound's Halo JC 3+ is a dual mono design with unbalanced inputs and outputs using Vampire RCA jacks, plus balanced outputs using Neutrik XLR jacks. A variable MC load adjust independent for each channel from 50-550 ohms with dual gang potentiometers specially made for Parasound by Vishay.
Designed by John Curl
John Curl is one of the finest analog audio designers of all time. In the ‘70s he designed mixing consoles for the Grateful Dead and Jefferson Airplane, then the original Mark Levinson JC 2, Vendetta Research, his own brand, a $75,000 phono stage for Constellation Audio. Since 1989 Curl has guided Parasound in developing amplifiers and preamplifiers with a reputation for superior sonics, high value and longevity.
Multiple Cartridge Settings
A custom-made three-position input impedance/gain switch provides for 47k Ohm MM, variable impedance MC, and 47k Ohm MC. The latter is an ideal load for some MC cartridges and high-end moving iron cartridges. Variable MC load adjust independent for each channel from 50-550 ohms with dual gang potentiometers specially made for Parasound by Vishay.
Balanced XLR Outputs
Recording and broadcast studios use balanced connections exclusively because of their inherent ability to reject noise and hum, thus assuring the best sound. Certain high quality preamplifiers and surround controllers built for residential use utilize balanced connections with XLR jacks for the same reasons. All Parasound Halo series power amplifiers have balanced inputs with XLR jacks so you can take full advantage of their inherent noise reduction capability.
Dual Mono Power Supply & Toroid Transformer
Separate high speed-soft recovery rectifiers, filter caps and voltage regulators for each channel. Large low ESD power supply filter caps offer greater reserve for head-snapping dynamics. Built-in AC line conditioner to prevent AC noise from polluting the circuits.
Distributed Brand Warranty
We want to make our Affiliate program as easy as possible. That’s why we process all claims directly, without any third party telephone tag. Specific warranty terms and details from the manufacturer are below. View the full Parasound Warranty.
| Loading… |
WARNING: This product contains chemicals including Styrene which is known to the state of California to cause cancer, and Bisphenol A (BPA), which is known to the state of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
In certain instances promotional prices will be offered listed above as a “Price with Rebate”, and are typically dated. In these cases Instant Rebate (IR) pricing is good sometimes only for the day only or only for the week. In order to be eligible for IR pricing – the order must be paid for AND picked up/shipped out. If you are placing an online order outside of business hours within your respective time zone, please add a note to your order for the team to confirm the pricing, or contact the branch the following business day to ensure that the item pricing carries over into the subsequent period. If an alternate branch location is still open in another time zone, please reach out to that group.
|