800-795-5111
 

Other products by Lutron
(Tech Support Website)



Item #: PD-6WCL-BL
MSRP: $75.50
Login


CasétaT Wireless In-Wall Dimmer

The CasétaT Wireless in-wall dimmer controls lighting loads automatically through wireless sensors and wireless remote controls, providing a system that delivers energy savings, convenience, and ease of installation. The CasétaT Wireless in-wall dimmer uses LutronR patented Clear ConnectR RF Technology, which enables wireless communication with Radio Powr SavrT sensors and PicoR remote controls for total load control.

 

FEATURES

  • The CasétaT Wireless in-wall dimmer provides dimming of multiple load types and allows remote control and occupancy/vacancy sensing when paired with wireless transmitting devices.
  • LutronR patented Clear ConnectR RF Technology works through walls and floors.
  • Includes Front Accessible Service Switch (FASST) for safe lamp replacement.
  • Two-wire dimmer ideal for retrofit applications. No neutral required.
  • Power failure memory: If power is interrupted, the control will return to its previously set level prior to interruption.
  • Works with dimmable LEDs and CFLs as well as incandescent and halogen light bulbs.

 

SPECIFICATIONS

 

Regulatory Approvals

  • cULus Listed
  • NOM certified
  • FCC Approved. Complies with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules
  • Industry Canada certified
  • COFETEL certified

 

Power

Operating voltage: 120 V~ 50/60 Hz

 

Key Design Features*

  • Tested to withstand electrostatic discharge without damage or memory loss, in accordance with IEC 61000-4-2.
  • Tested to withstand surge voltages without damage or loss of operation, in accordance with IEEE C62.41-1991 Recommended Practice on Surge Voltages in Low-Voltage AC Power Circuits.
  • Dimmers always operate locally and do not require system control.
  • Power failure memory: should power be interrupted, the control will return to its previously set level prior to the interruption when power is restored.
  • Uses LutronR ClaroR wallplates or designer-style wallplates from other manufacturers. Wallplates are sold separately.
  • LutronR ClaroR wallplates snap on with no visible means of attachment.
  • Requires a 1-gang U.S. wallbox. 31 ⁄2 in (89 mm) deep recommended, 21 ⁄4 in (57 mm) deep minimum.
  • Green LEDs indicate load status.

 

System Communications and Capacity

  • The CasétaT Wireless in-wall dimmer communicates with the PicoR remote controls and Radio Powr SavrT sensors through radio frequency (RF).
  • The CasétaT Wireless in-wall dimmer must be located within 60 ft (18 m) line-of-sight or 30 ft (9 m) through walls, of PicoR remote controls and Radio Powr SavrT sensors.
  • Up to ten transmitting devices may be associated to each in-wall dimmer.

 

Environment

  • Ambient operating temperature: 32 °F to 104 °F (0 °C to 40 °C), 0%-90% humidity, non-condensing. Indoor use only.

 


Prop 65WARNING: This product contains chemicals including Styrene which is known to the state of California to cause cancer, and Bisphenol A (BPA), which is known to the state of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.


New Project

Print Project

PrintProject

Volutone