UniFi Switch Flex
USW-Flex
5-Port managed PoE switch with (1) 802.3at/bt (PoE+/PoE++) input port and (4) 802.3af (PoE) Gigabit Ethernet ports
Build and expand your network with the UniFi® Switch, part of the UniFi Enterprise System. The UniFi Switch, model USW-Flex, is a configurable Layer 2 Gigabit switch with auto-sensing 802.3af PoE. It offers 5 RJ45 Gigabit Ethernet ports, providing 1 PoE input and 4 PoE output links to your devices.
The UniFi Switch Flex features a single PoE In port for power and four PoE ports that provide up to 15W PoE output to power a UniFi access point or other PoE devices. With 802.3bt rated PoE switches (USW-Pro-48-PoE, USW-Pro-24-PoE, US-XG-6POE, and USW-Industrial switches, sold separately) as power source, USW-Flex supports maximum 46W PoE output budget. It has weatherproof housing and offers versatile mounting options.
Managed and configured by the UniFi Controller or UniFi Mobile app, the UniFi Switch Flex offers basic Layer 2 switching protocols and features. The UniFi Controller and mobile app allow admins to configure and monitor virtually all of the switch features using a graphical user interface from anywhere.
Managed by UniFi Network Controller version: 5.10.3 or higher
Works with UniFi Network Controller
- Manage Your Networks from a Single Control Plane
- Intuitive and Robust Configuration, Control and Monitoring
- Remote Firmware Upgrade
- Users and Guests
- Guest Portal/Hotspot Support
| Weight |
230 g
(8.11 oz) |
| Networking Interfaces |
(5) 10/100/1000 Mbps RJ45 Ports |
| Management Interface |
Ethernet In-Band |
| PoE Out (Ports 2-5) |
802.3af (Pins 1, 2+; 3, 6-) |
Max Power Consumption
(Excluding PoE Output) |
5W |
| Max PoE Wattage Per Port |
15.4W |
Total PoE Power Budget
Powered by 802.3af
Powered by 802.3at
Powered by 802.3bt
Powered by PoE Adapter
(Enabled in Controller) |
8W
20W
46W
46W |
Voltage Range
802.3af
802.3at/bt |
44 - 57V
50 - 57V |
LEDs
System
RJ45 Data Ports |
Status
PoE; Link/Speed/Activity |
| ESD/EMP Protection |
± 16kV Air, ± 16kV Contact |
Operating Temperature
46W PoE Output
25W PoE Output |
-40 to 55° C (-40 to 131° F)
-40 to 65° C (-40 to 149° F) |
| Operating Humidity |
5 to 95% Noncondensing |
| Certifications |
CE, FCC, IC |
| POWER METHOD (PORT 1) |
PoE Type
802.3af/at (Pins 1, 2+; 3, 6-)
802.3bt (Pins 1, 2+; 3, 6- and 4, 5+; 7, 8-)
50V/60W PoE Adapter* |
Recommended PoE Source
USW-24-PoE (sold separately)
USW-Pro-24-PoE (sold separately)
PoE Injector, POE-50-60W-WH or POE-50-60W (sold separately) |
| USW-FLEX-UTILITY 60W POE ADAPTER |
| Dimensions |
118.5 x 63 x 34.7 mm
(4.66 x 2.48 x 1.36") |
| Weight |
206 g
(7.27 oz) |
| Output Voltage |
54V, 1.11A |
| Rated Voltage |
100-240VAC |
| Input Current |
1.5A (Max.) |
| Efficiency |
> 86% |
| Output Ripple |
200mVpp |
| Line Regulation |
< 1% |
| Load Regulation |
< 3% |
| 4-Pair Powering |
Pins 1, 2, 4, 5+ and Pins 3, 6, 7, 8- |
| Operating Temperature |
-20 to 60 ̊ C (-4 to 140 ̊ F) |
| Storage Temperature |
-30 to 70 ̊ C (-22 to 158 ̊ F) |
| Operating Humidity |
5 to 90%, Noncondensing |
| Surge Immunity |
4kV Difference and Common Mode |
* To enable PoE output power, select Power Source > PoE Injector in UniFi Controller.
 | Loading… |
 WARNING: This product contains chemicals including Styrene which is known to the state of California to cause cancer, and Bisphenol A (BPA), which is known to the state of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
|