800-795-5111
 

Other products by Williams Sound
(Tech Support Website)



Item #: PPA457PRO
MSRP: $1,449.00
Login


PPA 457 PRO Personal PA® Pro FM Assistive Listening System

Description

The Personal PA 457 PRO features the cutting-edge PPA T45 transmitter, with multiple digital audio input options and an OLED display with easy-to-manage menu navigation. Features three powerful microprocessors and the same high-quality audio and RF performance you’ve come to expect from Williams Sound. With an operating range of up to 1000 feet, the PPA 457 PRO is ideal for large venues where superior coverage is essential. This complete turnkey solution includes four PPA R37 receivers, each featuring seek-button channel selection with access to 17 pre-set wideband frequencies between 72-76 MHz. Includes a coaxial cable and rack panel kit for professional installation. The system is expandable, accommodating any number of listeners. This system complies with 2010 ADA guidelines for hearing assistance and is covered by Lifetime PLUS Limited Warranty.

NOTE: Approved by the FCC for operation in U.S. markets. The system cannot be used in all countries. Check with your government radio regulations for 72-76 MHz operation.

 

System Includes

(1) PPA T45 Transmitter
(4) PPA R37 Receivers
(2) NKL 001 Neckloops
(4) EAR 013 Single Mini Earbuds
(1) ANT 025 Whip Antenna
(1) TFP 048 Power Supply
(1) WLC 004 Main Power Cord (U.S.)
(1) WCA 013 RCA Audio Cable, 3ft.
(4) BAT 001-2 AA Alkaline Batteries
(1) IDP 008 Wall Plaque
(1) ANT 005 Coaxial Antenna
(1) RPK 005 Rack Panel Kit
 
Optional 17-channel receiver (PPA R38) is available for multi-channel applications.

Features

  • T45 professional transmitter
  • Up to 1000’ operating range
  • OLED display, push-button menus
  • Microprocessor controlled
  • Accommodates any number of listeners
  • Adjustable power output
  • Combo XLR, ¼” TRS inputs
  • Meets ADAAG guidelines
  • Lifetime PLUS Limited Warranty. 90 days on accessories.
  • Made in the USA

 

ANT 005

Use with

PPA T45,PPA T45NET, PPA T27 Transmitters

Connector type

F-connector

Cable type

RG 59 coax

Nominal Impedance

75 Ohm

Total Cable Length

22 ft

Active Antenna Length

80 in

BAT 001-2

Alkaline, 1.2 Volt

EAR 013

Plug

3.5 mm mono

Cord length

39 inches

Impedance

32 Ohms

Frequency Range

20 - 20kHz

Max input power

5mV

Sensitivity

128dB @ 1kHz

Driver size

13 mm

Weight

9g

Replacement earpad

EAR 015

PPA R37

Dimensions: 4.1” x 2.85” x 1.38” (104 x 72 x 35mm)
Weight: 4.6oz (130g) with batteries. 2.6oz (73g) without batteries     
Color: Black
Battery Type: (2) AA Alkaline or 2 x AA NiMH    
Battery Life: Two (2) AA non-rechargeable alkaline batteries (BAT 001), approx. 50 hrs
  (2) AA rechargeable NiMH batteries (BAT 026), 1500 mAh, approx. 32 hrs
Current Consumption: 52mA nominal
Temperature Range: – 0 to 50C
Channels 17, accessed via seek button in battery compartment
Operating Freq.: 72.1, 72.2, 72.3, 72.4, 72.5, 72.6, 72.7, 72.8, 72.9, 74.7, 75.3, 75.4, 75.5, 75.6, 75.7, 75.8, 75.9 MHz*
Intermediate Freq.: 75 kHz
FM Deviation: 75 kHz
De-Emphasis: 75 µS
LED Indicator: Power:  Green; Low Battery:  Flashes Green
AFC Range: ± 120 kHz
Sensitivity: 2 µV at 12 dB Sinad with squelch defeated
Input Overload: 100 mV
Frequency Response: 200 – 15 kHz
Modulation: FM, +/- 75 kHz peak deviation
Signal-to-Noise Ratio: 65 dB min @ 100 uV
Receive Antenna: Integral with earphone/headphone cord
Audio Output: 35 mW max, peak into 16 ohms
Output Connector: 3.5 mm stereo/mono phone jack
Earphone: Earbud-type with foam cushion, 3.5 mm plug, 32 Ω
Auto Shut-off Enters sleep mode after approx 6 mins of no RF signal
Approvals: FCC, Industry Canada, RoHS, WEEE
Warranty: Lifetime PLUS Limited Warranty, 90 Days on most accessories.

PPA T45

Dimensions:

8.45” W x 8.25” D x 1.72”H (21.5 cm x 21 cm x 4.4 cm)

Weight:

Transmitter: 3.0 lbs (1.36 kg)

Shipping Weight: 4.50 lbs (2.04 kg)  (Transmitter, Power Supply, Antenna and packaging)

Color:

Black/Silver with black legends on the front, white legends on the back

Rack Mount:

Standard 19” Rack, one EIA rack space high, 1/2 space wide
1–2 units can be mounted in a single rack space with optional RPK 005 (single) or RPK 006 (double) Rack Mount Kits

Power Supply:

 

Desktop Style Transformer (TFP 048).

Input: 100-240 VAC, 50/60 Hz.  IEC Line Cord.

Output: 24 VDC, 750 mA, 18W.  2.5mm ID center positive barrel connector.   

Approvals:  UL, CUL, Energy Star V, CSA listed.

Power ON Indicator

Push On/Push Off latching power button, backlit Green indicates Power ON, backlight off indicates power OFF.

Temperature Range:

Operating: +32° F to +104° F (0° C to 40° C)

Storage: -4° F to +158° F (-20° C to 70° C)

Menu Settings:

Audio Presets (Music, Voice, Hearing Assist, Custom), Frequency/Channel selection, Frequency/Channel mode, Audio Input Source (Microphone, Line, Phantom, Digital AES/EB, Digital S/PDIF), High Pass Filter, Low Pass Filter, Compression, RF Output Power, Screen Saver Delay, Test Tone (400 Hz), Headphone Volume, Headphone Source

RF Section

Operating Frequencies:

72.1-75.9 MHz , 17 wideband channels (selectable)

Frequency Accuracy:

± 2 ppm stability, 0-50˚ C

Deviation:

± 75 kHz maximum.

Pre-Emphasis:

75 µsec.

RF Field Strength:

Does not exceed 80 mV/m at 3 m

Compatible Antennas:

ANT 005, ANT 021, ANT 024, ANT 025, ANT 028, ANT 029, ANT 034.

Transmission Range:

Up to 1000 ft (304 m) with ANT 005 coaxial antenna mounted on rear chassis connector.

RF Timer:

Menu selectable - 30 Min, 4 Hours, or Always On.  Timer starts when no audio is present.

RF Power:

Menu selectable - High, Medium, Low, OFF.

RF Outputs:

(1x) #10-32 stud connector in center of unit (pcb mounted)

(1x) F-connector on rear chassis

RF Transmit Indicator:

1 Green LED, indicates RF “ON”

Audio Section

Audio Processor Functions:

DSP.  Compression: 1:1, 1.5:1 or 2:1. High Pass and Low Pass Filter Frequency control.

Frequency Response:

31 – 16000 Hz, ±3 dB (“Music” Audio Preset)

Signal-to-Noise Ratio:

≥74 dB Transmitted RF

Total Harmonic Distortion:

Less than 0.25% @ 1 kHz (RF output)

Common Mode Rejection:

>57 dB @ 1 kHz, Mic or Line

Audio Inputs:

(1x) Combination 3-pin XLR, 1/4” TRS jack for Mic or Line Level Analog Audio.  Balanced or Unbalanced Line Level, or Microphone with Selectable Phantom Power.

(1x) XLR for Digital Audio, AES3/EBU, supported sample rates 44.1 kHz and 48 kHz.

(1x) RCA for Digital Audio, S/PDIF, supported sample rates 44.1 kHz and 48 kHz.

Audio Input Gain Adjust:

In menu, adjustable to 0 to -50 dB, in 1dB steps

Phantom Power:

14.4 VDC applied through 2.2 kΩ resistors to analog combo jack: Pin 2 and Pin 3 on XLR jack, or tip and ring on 1/4” TRS jack

Audio Level Indicators:

10-LED array that reads -18 to +9 dB at 3 dB intervals. 7 Green, 2 Amber, and 1 red LED.  Green LEDS indicate normal operating audio level peaks, Amber LEDS indicate close to overload peaks, Red LED indicates overload peaks.

 

Input Levels (Bal or Unbal):

(at Audio Input Gain = 0dB)

Nominal (1st Amber LED)

Overload Warning

(Displayed on Screen)

Absolute Maximum Ratings*

Microphone:

-55 dBV (1.7 mV RMS)

-15 dBV (180 mV RMS)

+20dBV (10.0 V RMS)

Line:

-25 dBV (55 mV RMS)

+16 dBV (6.3 V RMS)

+20 dBV (10.0 V RMS)

 

Headphone Output:

1/4” TRS stereo jack, mono signal, 15.7 mW, maximum in 33 Ω (level adjustable in menu 0 to -40 dB in 2 dB steps)

Line Output:

RCA jack (black), -10 dBV (.32 VRMS).  Output impedance 100 Ω.

Ethernet:

RJ-45 on back of unit (PPA T45NET only)

Approvals:

FCC, RoHS2, WEEE, Industry Canada

Warranty:

Lifetime PLUS Limited Warranty (90 Days on most accessories)

 

 

 

 

 

 



Prop 65WARNING: This product contains chemicals including Styrene which is known to the state of California to cause cancer, and Bisphenol A (BPA), which is known to the state of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.



In certain instances promotional prices will be offered listed above as a “Price with Rebate”, and are typically dated. In these cases Instant Rebate (IR) pricing is good sometimes only for the day only or only for the week. In order to be eligible for IR pricing – the order must be paid for AND picked up/shipped out. If you are placing an online order outside of business hours within your respective time zone, please add a note to your order for the team to confirm the pricing, or contact the branch the following business day to ensure that the item pricing carries over into the subsequent period. If an alternate branch location is still open in another time zone, please reach out to that group.


Other Items In This Category

New Project

Print Project

PrintProject

Volutone