SSFSFPSM10G | 10G SM SFP+ Transceiver
This 1310 nm DFB 10 Gigabit SFP+ transceiver is designed for long range transmission (up to 20km) over single mode fibers.
It uses a Fabry-Perot laser transmitter at 1310nm. Line rate of transceiver is 10.3125Gbps. This SFP accepts two LC connectors.
The SFP+ LR module electrical interface is compliant to SFI electrical specifications. The transmitter input and receiver output impedance is 100 Ohms differential. Data lines are internally AC coupled. The module provides differential termination and reduce differential to common mode conversion for quality signal termination and low EMI. SFI typically operates over 200 mm of improved FR4 material or up to about 150mm of standard FR4 with one connector.
The transceivers follow the industry standards of the SFP Multi-Source Agreement (MSA) and SFF-8431, making them directly interchangeable with any networking device following industry standards.
Features
- Optical interface compliant to IEEE 802.3ae 10GBASE-LR
- Compliance: MSA SFF-8431, RoHS
- Hot Pluggable
- 1310nm DFB transmitter, PIN photo-detector
- Maximum link length of 20km over SMF
- Operating case temperature: 0 to 70°C
- Low power consumption
- All-metal housing for superior EMI performance
- Advanced firmware allow customer system encryption information to be stored in transceiver
- Cost effective SFP+ solution, enables higher port densities and greater bandwidth
Specifications
| |
| Speed |
9.95 to 10.3Gb/s |
| Optical connector |
Dual LC |
| Operating distance |
20Km |
| Power |
Single 3.3V |
| Fiber type |
Single-mode 9/125um, two strands |
| Wavelength |
1310nm |
| Compliance |
MSA SFF-8431, RoHS |
| Digital Diagnostic |
Yes (SFF-8472 compliant) |
 | Loading… |
 WARNING: This product contains chemicals including Styrene which is known to the state of California to cause cancer, and Bisphenol A (BPA), which is known to the state of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
In certain instances promotional prices will be offered listed above as a “Price with Rebate”, and are typically dated. In these cases Instant Rebate (IR) pricing is good sometimes only for the day only or only for the week. In order to be eligible for IR pricing – the order must be paid for AND picked up/shipped out. If you are placing an online order outside of business hours within your respective time zone, please add a note to your order for the team to confirm the pricing, or contact the branch the following business day to ensure that the item pricing carries over into the subsequent period. If an alternate branch location is still open in another time zone, please reach out to that group.
|