WS15Z-1: Z-Wave Wall Switch
Note to Installers: When installing a Z-Wave 3-Way Light setup utilizing Linear products, you will need a Load Bearing switch (WS15Z-1, WD500Z-1 or WD1000Z-1) and a non-load bearing WT00Z-1. Multiple WT00Z-1 switches can be utilized to control multiple Load Bearing devices. Please refer to the linked Technical Bulletin on Z-Wave 3-Way Light Switch Setup for more information.
The Linear WS15Z-1 Wall Mount Switch allows remote ON/OFF control of loads connected to the switch, and is easily wired in place of a standard wall switch.
The Switch integrates with other Linear Z-Wave enabled products, and can also act as a wireless repeater to ensure that commands intended for another device in the network are received (useful when a device would otherwise be out of radio range).
Replaceable Trim Ring
The WS15Z-1 Wall Mount Switch has a field replaceable trim ring - the color of the device can be altered with the Trim Ring Kit model in black, brown, almond and ivory.
device can be altered with the Trim Ring Kit model in black, brown, almond and ivory.
Specifications
- Maximum Load:
Resistive: 15 amps (1800 watts) max., 120 VAC
Motor: 1/2 H.P. maximum, 120 VAC
Incandescent: 600W maximum, 120 VAC
- Signal (Frequency): 908.42 MHz, 9.6Kbps or 40Kbps capable
- Range: Up to 100 feet between the wireless controller and/or the closest Z-Wave device
- Input: 120v 15A 60Hz
- Z-Wave Version 4.55
- Network wide inclusion
- Scene: Command Class
- Security beaming
- Requires a Neutral
- Replaceable Trim Ring Design