4K/UHD HDMI Over 100 M HDBaseT TX/RX with Ethernet, Control, PoE, and Return Optical Audio

AT-UHD-EX-100CEA-KIT

• 4K/UHD capability @ 60 Hz with 4:2:0 chroma subsampling
• HDCP 2.2 compliant
• Supports 4K HDR10 @ 24 Hz (4:2:0 chroma subsampling, 10-bit color)
• HDBaseTTM extender kit for HDMI®, Ethernet, power, and control up to 330 feet (100 meters)
• Receiver to transmitter digital audio pathway
• Receiver powered by transmitter via PoE (Power over Ethernet)
• Extends RS-232, IR, CEC, and Ethernet control signals over HDBaseT
• Multi-channel audio compliant for all PCM, Dolby®, and DTS® formats

 

 

The Atlona AT-UHD-EX-100CEA-KIT is an HDBaseT transmitter/receiver kit for HDMI transmission up to 330 feet (100 meters) over category cable with Ethernet pass through, RS-232 and IR control, Power over Ethernet, and optical audio from receiver to transmitter. This extender kit transmits video signals up to 4K/UHD @ 60Hz, 8-bit color, 4:2:0 chroma subsampling with embedded multi-channel audio and remote 48V power for the receiver. A digital audio pathway returning back across the HDBaseT link from a smart TV to an AVR routes multi-channel audio using TOSLINK optical connectors. Additionally, the kit extends Ethernet, RS-232, and 12 volt-based IR control commands. The kit is HDCP 2.2 compliant and supports EDID communication. Both transmitter and receiver feature one-third rack width metal enclosures for easy rack mounting with rear panel I/O ports for uncluttered wire management.

 

The Premium Extender for Residential Systems

The AT-UHD-EX-100CEA-KIT is a premium HDBaseT extender pair for residential systems that require audio from the TV to be amplified by an AVR near the set top box located at some distance from the TV. Return audio may be any audio signal including Dolby or DTS up to 5.1 (based on limitations of optical audio standard). The kit utilizes HDBaseT technology specifically designed to support audio extension based on HDBaseT 2.0 compared with some other solutions which use HDBaseT control channels to transmit return audio which may cause latency or quality issues.

The AT-UHD-EX-100CEA-KIT is ideal for use in residential installations with AVRs and STBs located in a separate area from the TV at longer distances than HDMI cables can support. The receiver to transmitter audio pathway supports digital audio from:

• Off-air tuners in many TVs
• Game systems located in the same room as TV
• Smart TVs with internal apps such as Amazon Prime Video, Hulu and Netflix

 

FEATURES

4K/UHD capability

• Compatible with Ultra High Definition sources and displays
• Full support of 4K/UHD streaming services and playback devices

HDCP 2.2 compliant

• Adheres to latest specification for High-bandwidth Digital Content Protection
• Allows protected content stream to pass between devices

Supports 4K HDR10 @ 24 Hz

• Extends 4K HDR10 @ 24 Hz (4:2:0 chroma subsampling, 10-bit color)

Receiver to transmitter digital audio pathway

• Routes multi-channel audio from TV to AVR on same extender and cable as video from set top box to TV
• Eliminates extra cable needed to bring high quality audio from embedded TV apps

Ethernet, RS-232, and Bi-Directional IR

• No additional control cables required
• Saves time and money during installation

Remote-powered receiver

• Power for receiver is supplied by transmitter over HDBaseT; meets HDBaseT certification requirements
• Saves time and integration costs; ensures interoperability and safety requirements

Extended distance HDMI extension

• Transmits HDMI signals up to 330 ft (100m) @ 1080P and 330 ft (100m) @ 4K/UHD using CAT6a/7 cable
• Uses easy-to-integrate category cable for low-cost, reliable system installation

AV, Ethernet, power, and control over HDBaseT

• Delivers 4K/UHD video, audio, 100Base-T Ethernet, power, and control through a single cable
• Eliminates multiple cable runs between source, control system, router, and display

Rear panel I/O connectors

• Placement of ports on rear panel simplifies wire management
• Saves installation time and eliminates clutter

Multi-channel audio compliant

• Supports PCM, Dolby Digital, Dolby Digital Plus™, Dolby TrueHD, Dolby Atmos®, DTS Digital Surround™, DTS-HD Master Audio™, DTS:X™
• Allows any multi-channel audio stream to be used within a professional audio system

Field updatable firmware

• Front panel USB port provides an easy means for kit upgrades
• Ensures long-term system return on investment

Front panel Power and Link status LEDs

• LED indicators provide power and HDBaseT link status information
• Provides easy setup and troubleshooting

Power chaining

• Included power supply provides ample power for up to three Atlona HDBaseT extenders
• Four Atlona HDBaseT extenders can be powered using the optional power supply
• Reduces clutter from multiple power supplies in equipment racks

Low-profile, 1 inch (2.5 cm) high 1/3 rack-width enclosure

• Easy installation into racks and confined spaces behind displays
• Keeps devices out-of-sight when placed in public spaces

Included accessories

• User guide, desktop power supply for transmitter, detachable power cable, IR emitter P/N AT-IR-CS-TX, mounting brackets

Award-winning 10 year limited product warranty

• Ensures long-term product reliability and performance in residential and commercial system
• Specify, purchase, and install with confidence

 

SPECIFICATIONS

Video	4096×2160@24/25/30/50*/60Hz*, 3840×2160@24/25/30/50*/60Hz*, 2048x1080p, 1080p@23.98/24/25/29.97/30/50/59.94/60Hz, 1080i@50/59.94/60Hz, 720p@50/59.94/60Hz, 576p, 576i, 480p, 480i
VESA	2560×2048, 2560×1600, 2048×1536, 1920×1200, 1680×1050, 1600×1200, 1600×900, 1440×900, 1400×1050, 1366×768, 1360×768, 1280×1024, 1280×800 1280×768, 1152×768, 1024×768, 800×600, 640×480
Colorspace	YUV, RGB
Chroma Subsampling	4:4:4, 4:2:2, 4:2:0
Color Depth	8-bit, 10-bit, 12-bit
HDR	4K HDR10 @ 24Hz, 4:2:0 chroma subsampling, 10-bit color (Source signal delivered from Ultra HD Blu-ray as 4K @ 24Hz 4:2:2. Not compatible with HDR10 @ 60Hz.)

Audio
HDMI (pass through)	PCM 2Ch, LPCM 5.1, LPCM 7.1, Dolby Digital, DTS 5.1, Dolby Digital Plus, Dolby TrueHD, DTS-HD Master Audio, Dolby Atmos, DTS:X
Optical (pass through)	PCM 2Ch, LPCM 5.1, Dolby Digital, DTS 5.1
Sample Rate	32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz
Bit Rate	up to 64-bit

Distance
CAT5e @ 4K	up to 90 meters	up to 295 feet
CAT6/6a/7 @ 4K	up to 100 meters	up to 330 feet
CAT5e @ 1080p	up to 100 meters	up to 330 feet
HDMI IN/OUT @ 4K	up to 5 meters	up to 15 feet
HDMI IN/OUT @ 1080p	up to 10 meters	up to 30 feet

Signal
Bandwidth	10.2 Gbps
CEC	Pass through
HDCP	Supports up to 2.2

Temperature
Operating	0°C to 50°C	32°F to 122°F
Storage	-40°C to 70°C	-40°F to 158°F
Humidity	20 to 90% non-condensing

Power
Consumption	20.61W (when TX and RX are paried)
Supply	Input: AC100~240V 50/60Hz Output: DC 48V/0.83A

Dimension
H x W x D	26 x 146 x 89 (mm)	1.02 x 5.75 x 3.5 (inch)

Weight
Unit	0.41kg	0.90lbs

Certification
Power Supply	CE, FCC, RoHS, cULus, RCM, CCC
Product	CE, FCC

* 4096×2160@50/60Hz & 3840×2160@50/60Hz supported @ chroma subsampling 4:2:0 8-bit only