Cool-stack II

00-303-01 Cool-stack II

With six 120mm fans and an 18" depth, the Cool-stack II has the power - and the reach - to pull up to 130 CFM of hot air out of tightly-packed racks while generating low noise levels. The Cool-stack II has two temperature-controlled speeds, and is installer-programmed to change speeds as rack temperature changes to satisfy the requirements of residential and commercial installations; in either case, heated air can be expelled through the perforated front panel or through ports on the top or rear panels using optional exhaust kits. Tubing and fittings in the kits allow the Cool-stack II to channel exhausted hot air from its top and rear exhaust ports to nearby closets, attics, utility rooms, etc.

• The rear exhaust kit –Two four-foot lengths of 2” diameter tubing can attach to fittings on the rear panel, and move heated air out of a rack cabinet, or into a near-by closet.

• The top exhaust kit – A blanking panel on the top of the Cool-stack II removes to allow the attachment of an eight-foot length of our 4”/6” (ID/OD) acoustically-insulated flex tubing (supplied). Hot air can be moved from within a rack, up through the top of an enclosure or a closet’s ceiling.

Note - see specifications (click below) for air flow when exhaust kits are used.

Cool-stack II — cools the rack AND the enclosure the rack is in!

Click HERE for installation instructions - Cool-stack II

Click HERE for specifications (all)