DSC POWERSERIES NEO 3G8080AT ATT COMMUNICATOR
PowerSeries Neo HSPA / CDMA Cellular Alarm Communicator
DSC NEO 3G8080AT Cellular Communicator
The DSC 3G8080AT is a cellular alarm communicator especially made for the new DSC NEO security systems. The 3G8080AT is Alarm.com ready and communicates over the AT&T cellular network. It adds Z-Wave capabilities so that you can use home automation and energy management features as well as interactive security and video monitoring.
This can be used as the primary communicator or as a backup to a landline in case of dialer failure. The 3G8080AT uses the HSPA communications path of the cellular network. You can use 2-way voice verification with this communicator. The signals that are sent out from the communicator are 128-bits AES encrypted and you can be assured that your signal transmission is secure.
These are compatible with the DSC NEO HS2016/ HS2032/ HS2064/ HS2128 control panels. They are not backwards compatible with the DSC 1616/1832/1864. They connect to the main board via a PCLink cable. You can get a PCLink extender if you don’t want to connect this directly at the box.
Specifications:
Power Supply Ratings
Input Voltage 11.3V - 12.5V DC
Current Consumption
Standby Current 100mA@12V
Alarm (Transmitting) Current 200mA@12V
Cellular Network
HSPA 3G
Operating Frequency
850, 1900, 2100MHz
Environmental Specifications
Operating Temperature 14°F to 131°F (-10°C to 55°C)
Storage Temperature -30°F to 140°F (-34°C to 60°C)
UL/ULC verified operation for 32°F-120°F (0°C-49°C) only
Humidity
90% non-condensing
Dimensions
6" x 8.9" x 1.3"
Weight
365g |
|
 | Loading… |
|