Other products by Episode
(Tech Support Website)

Item #: ECS800PND4BLK
MSRP: No Retail

Episode® 800 Commercial Series 70-Volt Pendant Speaker with Woofer and Gripple Kit (Each)


Ideal for spaces with tall, open ceilings, this pendant speaker gets the sound down where you need it and features wide dispersion that’s perfect for background music and paging applications. Thanks to smart engineering that includes a Gripple cable mounting kit and carrying handle, installing it has never been easier. A convenient cap on top of the speaker makes for a cleaner install and gives you the ability to mount the speaker lower, without seeing the wiring connection. Equipped with a two-way design, dual voltage support for 70V/100V with 8-ohm bypass, and outstanding driver voicing, this speaker provides exceptional sound clarity while hitting dynamic highs and lows.


Important Note - One Gripple™ cable is included. If a second cable is needed, it must be ordered separately.



Premium Components

Top-quality components provide uniform sound and wide dispersion that’s perfect for projecting music and paging in large buildings with high, open ceilings. This pendant speaker has a two-way design, dual voltage support for 70V/100V with 8-ohm bypass, polypropylene woofer with rubber surround, and a silk dome tweeter with neodymium magnet. Outstanding driver voicing is combined with a 1st order crossover for sound clarity beyond expectations, while a computer-optimized, low-turbulence tube port provides improved low-frequency response.




Smart Engineering

This pendant features a built-in handle for easier carrying. The screw terminal comes pre-installed on the speaker – not in some baggie you forgot about back at ground level. Lastly, the included Gripple cable mounting kit greatly simplifies the hanging process – just throw the 10' cable over the ceiling grid and insert it into the spring-loaded connector – no tools required. Plus, the cap on top of the speaker can be easily held out of the way during install by hanging it on the Gripple using the holder feature.



Speaker Cap

A convenient magnetic cap on top of the speaker allows for a clean install and gives you the ability to mount the speaker lower and hide the messy connection points on the top of the speaker out of sight. The cap can even hang on the Gripple to get it out of the way during your install. Note: This speaker comes with one Gripple cable but can be used with more than one if needed.




Tool-Less Tap Settings

Our tap adjustment is on the top – not hidden behind the grille – so it’s easily accessible. Plus, its “handy” tool-free design means you don’t need any tools to adjust it. Available settings are 3.75W, 7.5W, 15W, 30W, and 60W taps, plus an option for 8-ohm bypass.


Smarter Packaging

Working on a commercial jobsite where EPS foam isn’t allowed, or tired of cleaning up huge mounds of trash when the job is over? Our environmentally friendly cardboard packaging cuts down on waste – plus we ship everything you need for the install in one box.


UL Listed

This pendant speaker is UL 1480 listed. It is approved for use in fire protective signaling systems – and has passed the stringent standards needed to get the UL stamp of approval.


4" Polypropylene
20 mm Silk Dome
Power Output
40 Watts RMS (@ 8 Ω)
Nominal Impedance
8 Ohms
Transformer Tap Settings
70V: 3.8w, 7.5w, 15w, 30w
100V: 7.5w, 15w, 30w
8 Ω Bypass
Frequency Response
75Hz - 20kHz
84 dB
4.2 lb each
9.1" (231mm)
Gripple hook length: 10"
Speaker Grille
Perforated Aluminum Grille
Sold As
UL 1480


Prop 65WARNING: This product contains chemicals including Styrene which is known to the state of California to cause cancer, and Bisphenol A (BPA), which is known to the state of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

In certain instances promotional prices will be offered listed above as a “Price with Rebate”, and are typically dated. In these cases Instant Rebate (IR) pricing is good sometimes only for the day only or only for the week. In order to be eligible for IR pricing – the order must be paid for AND picked up/shipped out. If you are placing an online order outside of business hours within your respective time zone, please add a note to your order for the team to confirm the pricing, or contact the branch the following business day to ensure that the item pricing carries over into the subsequent period. If an alternate branch location is still open in another time zone, please reach out to that group.

New Project

Print Project