3 Button with Raise / Lower (WHITE)
RadioRAR 2 wall-mount designer keypads
provide homeowners with a simple and elegant way to operate lights, shades / draperies,
motorized screens, and many other devices. RadioRAR 2 keypads feature large, easy-to-use
buttons, plus a unique backlit engraving option that makes the keypads readable any time of the
day or night. The keypad buttons are rounded, allowing engraving to be displayed at an upward
angle, increasing readability. Replacement Kits are available in a variety of
colors and with custom engraving to clearly identify each button’s function. The flexible
design of the keypads allow the color, number of buttons, and the configuration of the buttons to
be changed after the keypad is installed. Use only LutronR Designer (ClaroR or Satin
ColorsR) wallplates. The mechanical design of the keypad is ONLY compatible with LutronR
wallplates and is NOT compatible with any other manufacturer’s wallplate. Wallplates are sold
separately. LutronR ClaroR and Satin ColorsR wallplates snap on with no visible means of
attachment.
Design Features
• At the press of a single button, lights fade ON
or OFF to desired levels and shades/draperies open or close to desired positions.
• Light levels and shade/drapery positions can be fine-tuned by pressing and holding the
raise / lower buttons
• Programmable to select scene or room preset
levels or positions.
• Adjustable backlight intensity.
• IR receivers at the front (-W5BRLIR only) and back (all models) of the keypad allow for the use of an IR remote for line-of-sight operation (front)or IR repeater kit integration (back).2 | Lutron®
• Use an IR remote to select the same
programmed rooms, scenes, and raise / lower buttons as the keypad (-W5BRLIR only).
• Configurable Raise/Lower selection
– Last button or IR room / scene (default) - devices controlled by the last button
pressed or last IR room / scene selected will
raise / lower. – Double-tap - devices controlled by a
double-tappedbutton will raise /lower.
• Prepaid engraving included. Redeemable for
Specifications
Power 120 V 50 / 60 Hz 0.5 A
Typical Power Consumption-0.6 W
Test conditions: all backlights on medium intensity, two LEDs on (two presets active), keypad powered at 120 V
Regulatory Approvals UL, CSA, NOM, FCC, IC, COFETEL, ANATEL
Environment Ambient operating temperature: 32 °F to 104 °F (0 °C to 40 °C),
0% to 90% humidity, non-condensing. Indoor use only.
Communications Wall-mount designer keypads communicate with the system through Radio Frequency (RF) and must be located within 30 ft (9 m) of a repeater. System devices operate on frequencies between 431.0 MHz and 437.0 MHz. ESD Protection Tested to withstand electrostatic discharge without damage or memory loss, in accordance with IEC 61000-4-2.
Surge Protection Tested to withstand surge voltages without damage or loss of operation, in accordance with IEEE C62.41-1991
Recommended Practice on Surge Voltages in Low-Voltage AC Power Circuits.
Power Failure Power failure memory: should power be interrupted, the keypad will return to its previous state when power is restored.
Mounting Requires a U.S. wallbox. 3 ½ in (89 mm) deep recommended, 2 ¼ in (57 mm) deep minimum.
Wiring Wall-mount designer keypads require a neutral wire connection.
Warranty 1 Year Limited Warranty. http://www.lutron.com/resiinfo
RadioRAR 2 Wall-mount Designer keypads
• At the press of a single button, lights fade ON
or OFF to desired levels and shades/draperies open or close to desired positions.
• Light levels and shade/drapery positions can
be fine-tuned by pressing and holding the raise / lower buttons.
• Programmable to select scene or room preset
levels or positions.
• Adjustable backlight intensity.
• IR receivers at the front (-W5BRLIR only) and
back (all models) of the keypad allow for the use
of an IR remote for line-of-sight operation (front)
or IR repeater kit integration (back).