AXS Series Rack, MRK-4426AXS-Z4
MRK-4426AXS-Z4
Roll entire bays of equipment straight out for service and installation flexibility. A factory-assembled system in an MRK enclosure, this patented design is ideal for access to rear equipment connections.
Select an AXS when space-limited environments require equipment bays to be placed up against a wall or back to back and a straight pullout is preferred.
Features
- Host enclosure can be pre-installed on-site
- Detachable rack frame can be integrated with equipment and tested off-site
- Service stand raises service tracks to bottom of AXS, allowing it to pull out
- Standard fixed front and rear 10-32 threaded rackrail with numbered spaces
- Includes articulating cable carriers for effective cable management
- System includes host cabinet, rack frame, cable carriers, base, and safety leashes
- Service tracks and stands sold separately
- Service tracks and stands sold separately
Key Specifications
General Info
finish: Black Powder Coat
UL Standards Tested: UL1678
Listing Agencies/Third Party Information
ASC E: 7-10
RoHS: Yes
Greenguard: Yes
UL Listing No: E173107
Seismic Rating: Yes
Dimensions
Usable Depth: 20
Usable Height: 71.75
Capacity Weight U S: 650
Depth U S: 26.4
Height U S: 83.125
Width U S: 22
Primary Package Weight U S: 188
Rack Units: 44
Technical Information
Rackrail Type: 10-32
Seismic Load Capacity: 520
U L Load Capacity: 2500
Material: Steel
Mounting: Horizontal
Patented EIA compliant 19” slide-out equipment rack shall be Middle Atlantic Products model # MRK-4426AXS-Z4. Rack shall consist of outer frame with internal roll-out equipment rack. External frame dimensions shall be 83-1/8” H x 22” W x 26-2/5” D. Useable rack height shall be 41 rackspaces, useable depth shall be 20”. Entire rack assembly shall have a weight capacity of 650 lbs. External frame shall be constructed of 16-gauge steel with black powder coat finish. Internal frame shall be constructed of 13-gauge steel with black powder coat and 11-gauge steel rackrail with tapped 10-32 mounting holes in universal EIA spacing with black e-coat finish and marked rackspaces. Top and bottom trim panels shall be 11-gauge black brushed and anodized aluminum. Rack top shall have openings to accept up to 2 fans, model # AXS-FAN (one fan) or AXS-FAN-K (two fans). Cable carrier shall be constructed of the following materials: cable carrier and lower hinges shall be constructed of 16-gauge steel, center hinge shall be constructed of 10-gauge steel, cable carrier shall be finished in black powder coat. Rack enclosure shall satisfy the 2007 & 2010 CBC; 2006, 2009 & 2012 IBC; ASCE 7-05 (2005 Edition) & ASCE 7-10 (2010 Edition) and the 2006 & 2009 editions of NFPA 5000 for use in areas of high seismicity, Seismic Use Group III, Zone 4 or Seismic Design Category (SDC) “D” with lateral force requirements for protecting 520 lbs. of essential equipment in locations with the highest level of seismicity and top floor or rooftop installations with an Importance factor (Ip) of 1.5 when used with the included (MRK-Z4) seismic floor anchor bracket. Service tracks shall be constructed of 13-gauge steel, model # TRACK50. Adjustable track leveler shall be model # TRACKL and shall level service tracks for equipment roll out and servicing. Slide-out equipment rack shall be GREENGUARD Indoor Air Quality Certified for Children and Schools. Slide-out equipment rack shall be RoHS EU Directive 2002 / 95 / EC compliant. Slide-out equipment rack shall be manufactured by an ISO 9001 and ISO 14001 registered company. Slide-out equipment rack shall be warrantied to be free from defects in material or workmanship for a period of 3 years.
 | Loading… |
 WARNING: This product contains chemicals including Styrene which is known to the state of California to cause cancer, and Bisphenol A (BPA), which is known to the state of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
In certain instances promotional prices will be offered listed above as a “Price with Rebate”, and are typically dated. In these cases Instant Rebate (IR) pricing is good sometimes only for the day only or only for the week. In order to be eligible for IR pricing – the order must be paid for AND picked up/shipped out. If you are placing an online order outside of business hours within your respective time zone, please add a note to your order for the team to confirm the pricing, or contact the branch the following business day to ensure that the item pricing carries over into the subsequent period. If an alternate branch location is still open in another time zone, please reach out to that group.
|