QSC AD-S52T-BK 5.25" Weather Resistant Surface Mount Speaker
Description
The AD-S52T models are equipped with a 70/100 volt matching transformer for distributed audio systems. There is a transformer tap switch on the rear panel for setting the power level of the loudspeaker. This switch may also be set for 8 ohm operation, bypassing the transformer completely—providing greater system flexibility compared to most competing products.
Features:
- 5.25", 2-way design—in a lightweight, contemporary styled multipurpose enclosure
- Magnetically shielded LF transducer—ideal for use near video monitors
- Flexible ball mount assembly included—for convenient installation
- 70/100 volt transformer versions available—for use with distributed audio systems
- Optional yoke mount bracket available
Specifications:
| Configuration |
Compact 2-way, ported enclosure |
| Transducers |
| Low-frequency Transducers |
5.25" shielded |
| High-frequency Transducer |
1" neodymium tweeter |
| Frequency Range1 |
| Frequency Response (-6 dB) |
75 Hz – 19 kHz |
| Useable Frequency Range (-10 dB) |
60 Hz – 20 kHz |
| Maximum Output2 |
| Calculated Peak Output |
107 dB SPL |
| Calculated Continuous Output |
101 dB SPL |
| Nominal Impedance |
8Ω switchable |
| Power Rating |
| RMS Power Handling3 |
60 W (100 hours IEC) |
| Recommended Max Amp Power |
120 W RMS |
| Sensitivity |
86 dB, 2.83V, 1 m, free field (4π) |
| Nominal Coverage (HV) |
90° x 90° |
| Transformers |
| Type |
Custom low distortion laminated core, wide bandwidth design |
| Taps |
70V: 30, 15, 7.5, 3.75 W; 100V: 30, 15, 7.5 W |
| Enclosure |
| Material |
Injection molded, weather resistant, high impact polystyrene |
| Finish |
White or black (paintable) |
| Weather Resistant |
Yes |
| Grille |
Heavy duty powder coated aluminum |
| Connectors |
Pair of 5-way binding posts |
| Mounting Hardware |
Included ball mount assembly; optional yoke mount bracket available |
| Weight - Net / Shipping |
18 lb. (8.2 kg) / 25 lb (11.4 kg) |
 | Loading… |
|