QSC K10 2-Way Powered Speaker - 1000 Watts, 1x10"
K10 features include:
- 10” Woofer; 1.75” diaphragm compression driver
- 90° Nominal coverage angle
- Maximum SPL 129 dB peak
- 1000-watt continuous Class D power modules in all models
- Onboard mixer with two combo XLR and ¼” inputs, and stereo RCA inputs, (three audio input sources); two direct channel outputs and single summed balanced output
- Extensive DSP enhances system performance
- DMT™ (Directivity Matched Transition) provides for matched LF and HF coverage across the entire listening area, eliminating unnatural "dead" or "hot" frequency zones.
- Intrinsic Correction™, first featured in our high-end line-array products maps 65–75 spatially-averaged measurements to IIR and FIR filters that actively adjust time, frequency and amplitude response to a maximally flat band pass target. The result is a speaker that behaves equally well across the entire sound field.
- DEEP™ and excursion limiting allow for extended low-frequency response by actively managing low-frequency transients without degradation of the underlying signal or adjacent frequencies.
- GuardRail™ protection protects both the amplifier module and your performance from unnatural and destructive clipping.
- Attractive and professional appearance
- Rugged ABS enclosures
- Functions as a monitor wedge
- 16-gauge powder coated steel grille
- Comfortable ergonomic handles
- 35 mm pole sockets with Tilt-Direct™
- M10 rigging points
- Eyebolt and yoke mount accessories available
| K Series |
|
|
|
| SPECIFICATIONS |
K8 |
K10 |
K12 |
| Configuration |
Trapezoidal 2-way |
Multipurpose 2-way |
Multipurpose 2-way |
Transducers
Low-frequency
High-frequency |
8" cone transducer
1.75" diaphragm compression driver |
10" cone transducer
1.75" diaphragm compression driver |
12" cone transducer
1.75" diaphragm compression driver |
| Frequency Response (-6 dB) |
66 Hz to 18 kHz |
60 Hz to 18 kHz |
52 Hz to 18 kHz |
| Frequency Range (-10 dB) |
61 Hz to 20 kHz |
56 Hz to 20 kHz |
48 Hz to 20 kHz |
| Nominal Coverage (-6 dB) |
105° conical |
90° conical |
75° conical |
| Maximum SPL1 |
127 dB peak |
129 dB peak |
131 dB peak |
| Amplifiers |
| Power Output2 |
1000 W continuous Class D
(500 W LF, 500 W HF)
2000 W peak |
1000 W continuous Class D
(500 W LF, 500 W HF)
2000 W peak |
1000 W continuous Class D
(500 W LF, 500 W HF)
2000 W peak |
| Input Impedance |
XLR / ¼": 40 kΩ balanced / 20 kΩ unbalanced
XLR / ¼" MIC mode: 2260Ω balanced
RCA: 10 kΩ |
| Controls |
Power, Gain A, Gain B, Mic/Line, LF Mode (Ext Sub/Norm/DEEP™), HF Mode (Flat/Vocal Boost), Front LED (On/Off/Limit) |
| Indicators |
Power, Signal A, Signal B, Standby, Limit, Mic |
| Connectors |
Balanced female XLR/¼" line/mic level input, Balanced female XLR/¼" line level input, Dual Balanced male XLR full range line level out , Balanced male XLR "mix" out, Stereo RCA line level input, Remote gain control, Locking IEC power connector |
| Cooling |
On demand, 50 mm variable speed fan |
| Amplifier Protection |
Thermal limiting, output overcurrent, overtemperature muting, GuardRail™ |
| Transducer Protection |
Thermal limiting, excursion limiting |
| AC Power Input |
Universal power supply 100–240 VAC, 50 to 60 Hz |
AC Power Consumption
(1/8 of full power) |
100 VAC, 2.3 A
120 VAC, 2.01 A
230 VAC, 1.13 A |
| Enclosure |
| Material |
Impact resistant ABS |
| Finish |
Black paint |
| Grille |
Rugged powder-coated steel |
| Dimensions (HWD) |
17.7" × 11" × 10.6"
450 mm × 280 mm × 269 mm |
20.4" × 12.6" × 11.8"
519 mm × 320 mm × 300 mm |
23.7" × 14" × 14"
603 mm × 356 mm × 356 mm |
| Weight (Net) |
27 lb / 12.2 kg |
32 lb / 14.5 kg |
41 lb / 18.6 kg |
| Available Accessories |
K8 tote, K8 yoke, M10 Kit-C |
K10 tote, K10 yoke, M10 Kit-C |
K12 tote, K12 yoke, M10 Kit-C |
| K Series |
|
| SPECIFICATIONS |
KSub |
| Configuration |
4th-order bandpass |
Transducers
Low-frequency |
2 × 12" cone transducers |
| Frequency Response (-6 dB) |
48 Hz to 134 Hz |
| Frequency Range (-10 dB) |
44 Hz to 148 Hz |
| Maximum SPL1 |
130 dB peak |
| Amplifiers |
| Power Output2 |
1000 W continuous Class D (2 × 500 W)
2000 W peak |
| Input Impedance |
XLR / ¼": 40 kΩ balanced / 20 kΩ unbalanced |
| Controls |
Power, Gain, LF Mode (Normal/DEEP™), Polarity (Normal/Reverse), Front LED (On/Off/Limit) |
| Indicators |
Power, Signal, Standby, Limit |
| Connectors |
Dual balanced female XLR/¼" line level input, Dual Balanced male XLR full range line level out, Remote gain control, Locking IEC power connector |
| Cooling |
On demand, 50 mm variable speed fan |
| Amplifier Protection |
Thermal limiting, output overcurrent, overtemperature muting, GuardRail™ |
| Transducer Protection |
Thermal limiting, excursion limiting |
| AC Power Input |
Universal power supply 100–240 VAC, 50 to 60 Hz |
AC Power Consumption
(1/8 of full power) |
100 VAC, 2.3 A
120 VAC, 2.01 A
230 VAC, 1.13 A |
| Enclosure |
| Material |
Painted birch plywood |
| Finish |
Black textured paint |
| Dimensions (HWD) |
26" × 14" × 28.1" (including casters)
665 mm × 356 mm × 714 mm |
| Weight (Net) |
74 lb / 33.6 kg |
| Available accessories |
KSub cover |
|