800-795-5111
 

Other products by Russound
(Tech Support Website)

View Accessories

Item #: P125
MSRP: $549.00
Login


RUSSOUND P125 2-CHANNEL
DUAL SOURCE 125 WATT AMPLIFIER

 

 Dual Source Power Amplifier (80/125W) P125
 Dual Source Power Amplifier (80/125W) P125 The Russound P125 is a 2-channel dual source power amplifier with auto-source switching. It features Primary and Secondary audio line inputs with a loop out to another zone, receiver, or device from the secondary source. A speaker-level input can be connected and assigned as either the primary or secondary source. This amplifier can be used for power upgrades in zones for large speaker selector or volume control systems. The P125 is rated at 125 watts per channel into 4 ohms, and 80 watts into 8 ohms. With the Stereo/Bridge Mono switch in the Bridge Mono position, both amplifier channels are combined for a higher powered mono output. In Bridge mode the X125 is rated at 250 watts of power into a single 8 ohm load. The 12V Trigger In/Out allows the amplifier to be activated by other devices or to activate other electronics via a 3.5 mm mini phone plug cable, with 100mA current capability.
Product Type:Amplifier
Technical Information
Minimum Frequency Response:20 Hz
Maximum Frequency Response:20 kHz
Impedance:4 Ohm
Audio
Audio Channels:2
RMS Output Power:250 W
Interfaces/Ports
Number of Analog Audio Inputs:4
Physical Characteristics
Color:Black
Miscellaneous
Environmentally Friendly:Yes
Environmental Certification:WEEE
Country of Origin:China

Prop 65WARNING: This product contains chemicals including Styrene which is known to the state of California to cause cancer, and Bisphenol A (BPA), which is known to the state of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.


New Project

Print Project

PrintProject

Volutone