Other products by Strong Mounts
(Tech Support Website)

MSRP: No Retail

Strong™ Razor Dual-Arm Articulating Mount for Flat-Panel TVs

Perfect for mounting a smaller TV onto a single stud, the Strong™ Razor Articulating Dual-Arm Mount for Flat Panel TVs sits just 1.75" off the wall to provide an elegant, low-profile solution. It features an easy-to-install, three-piece construction - meaning you don't need a second person to hang it - and its curved, cast-aluminum Razor mount arms are not only lightweight and Strong™, but they look great too. This mount is full of custom AV and installer-friendly features like post-installation leveling, height, and tilt adjustments, this Razor mount makes your install thinner - and your life easier.


Installation - Use the Strong™ Mount Adapter Plates to get support for larger TVs with VESA patterns up to 400 x 400 And when studs aren't located where you need them, grab the Strong™ Wall Bracket to handle stud patterns from 16' to 20'.


One Person Installation

These mounts feature a smart 3-piece construction – wall bracket, arm assembly, and TV plate – so it can be installed by just one person. The cast aluminum arms are lighter and easier to handle, while still providing plenty of strength.


Before securing the arm assembly to the wall mount, slide it 4.25" left and right to get it perfectly centered.


Tweak the height up to 1-in. post-install, thanks to this handy vertical adjustment screw.


Rest the TV plate on the arm assembly and roll it four° left and right for fast and easy leveling. Once it’s perfect, just tighten down the bottom screws.


The arm assembly base plate has a tilt angle of -12° to +5°, making it easy to get the TV at the perfect viewing angle. No tool required.



Home Position Latch

Sometimes heavier TVs can creep or tilt away from the wall over time. To prevent this, our engineers designed an adjustable home position latch to snap the TV into place, and keep it there.

Smart Keyholes

Smart Wall Bracket

A center hole location allows you to drill in a sheetrock screw for temporary hanging, then mark and measure all other hole locations ahead of time, secure the bolts in the wall, and mount the bracket into place.

Extension Bracket

Bigger & Better

This mount includes an extension bracket to support VESA patterns all the way up to 800x600. Even without the bracket, this mount provides plenty of support, fitting displays with VESA patterns of 800x400.

Low Profile

Low-Profile Design

Fully collapsed it sits just 1.6" off the wall, so it doesn’t add any unnecessary bulk. And when you pull it away from the wall, it looks just as good, too – thanks to all-black hardware and a sleek arm design.

Smooth Motion

Smooth Motion

Swiveling up to 180 degrees and extending out from the wall a whopping 25.5", this mount moves fluidly with minimal force required.


Distance Extended
Distance Retracted
  - 5 / + 12°
Maximum TV Size
Minimum TV Size
VESA Mounting Pattern
  200x300, 300x200, 300x300, 400x200,
400x300, 400x400, 500x400, 500x500, 600x400
Maximum Load Support
  100 lbs


New Project

Print Project