4K/UHD Remote Powered HDMI Over 100 M HDBaseT Transmitter with Ethernet, Control, and PoE
AT-UHD-EX-100CE-TX-PD
- 4K/UHD capability @ 60 Hz with 4:2:0 chroma subsampling
- HDCP 2.2 compliant
- Supports 4K HDR10 @ 24 Hz (4:2:0 chroma subsampling, 10-bit color)
- HDBaseTTM transmitter for HDMI®, Ethernet, power, and control up to 330 feet (100 meters)
- Remotely powered via PoE (Power over Ethernet)
- Transmits RS-232, CEC, and Ethernet control signals over HDBaseT
- Multi-channel audio compliant for all PCM, Dolby®, and DTS® formats
Learn more about Atlona’s 4K HDR integration products for residential and commercial applications.
Product Overview
UHD-EX-100CE Series HDBaseT Extenders
ATLONA UHD-EX SERIES
The AT-UHD-EX-100CE-TX-PD is part of the Atlona UHD-EX Series of HDBaseT extenders. See below for a complete listing of transmitters, receivers, and extender kits.
The Atlona AT-UHD-EX-100CE-TX-PD is an HDBaseT transmitter for HDMI transmission up to 330 feet (100 meters) over category cable with Ethernet pass-through and RS-232 control. It transmits video signals up to 4K/UHD @ 60 Hz with 4:2:0 chroma subsampling, plus embedded multi-channel audio. The AT-UHD-EX-100CE-TX-PD is HDCP 2.2 compliant and supports EDID communication. The transmitter features a quarter rack width metal enclosure for easy rack mounting with rear panel I/O ports for uncluttered wire management. This device is externally powered via Power over Ethernet, and is ideal for use with Atlona switchers with PoE-equipped HDBaseT inputs, including the AT-UHD-CLSO-612ED, AT-UHD-CLSO-840, and AT-UHD-SW-5000ED.
The AT-UHD-EX-100CE-TX-PD transmitter simplifies system design when powered by an Atlona switcher with HDBaseT inputs, reducing cost and complexity by eliminating the need for a power supply. It can also be paired with the AT-UHD-EX-100CE-RX-PSE receiver and AT-HDVS-200-RX scaling receiver, both delivering PoE. Installer-friendly features include a rack-mountable form factor that allows four transmitters to share a single 1U rack tray, and a front mounted USB port for easy firmware updates.
Applications
This transmitter is ideal for use in applications where:
- HDBaseT transmitters need to be installed in a location where local AC power may not be available, such as a lectern or conference room table
- 4K/UHD signal extension and HDCP 2.2 compliance are necessary in the system design
PRODUCT COMPATIBILITY
The AT-UHD-EX-100CE-TX-PD is compatible with the AT-UHD-EX-100CE-RX-PSE receiver, and both products are available together as a kit. This transmitter is also ideal for Atlona switchers and matrix switchers with HDBaseT inputs. See below for a list of compatible products.
FEATURES
4K/UHD capability @ 60 Hz with 4:2:0 chroma subsampling
- Compatible with Ultra High Definition sources and displays
- Full support of 4K/UHD streaming services and playback devices
HDCP 2.2 compliant
- Adheres to latest specification for High-bandwidth Digital Content Protection
- Allows protected content stream to pass between devices
Supports 4K HDR10 @ 24 Hz
- Extends 4K HDR10 @ 24 Hz (4:2:0 chroma subsampling, 10-bit color)
Remotely powered via PoE (Power over Ethernet)
- IEEE 802.3af PoE Powered Device (PD)
- Power for transmitter is supplied by receiver over HDBaseT
- Saves time and integration costs
AV, Ethernet, power, and control over HDBaseT
- Delivers 4K/UHD video, embedded audio, 100Base-T Ethernet, power, and control through a single cable
- Eliminates multiple cable runs between source, control system, router, and display
Extended distance HDMI extension
- Transmits HDMI signals up to 330 feet (100 meters) @ 1080p with CAT5e/6 or 4K/UHD using CAT6a/7 cable
- Uses easy-to-integrate category cable for low-cost, reliable system installation
Extends RS-232, CEC, and Ethernet control signals*
- Control signals travel over HDBaseT link to device for maximum control system flexibility
- Simplifies integration of source, control system, and display
- * The AT-UHD-EX-100CE-TX-PD does not include I/O ports for IR control signals extended over HDBaseT. If IR control over HDBaseT is required, please refer to the AT-UHD-EX-100CE-TX.
Rear panel I/O connectors
- Placement of ports on rear panel simplifies wire management
- Saves installation time and eliminates clutter
Multi-channel audio compliant
- Supports PCM, Dolby Digital, Dolby Digital Plus™, Dolby TrueHD, Dolby Atmos®, DTS Digital Surround™, DTS-HD Master Audio™, and DTS:X™
- Allows any multi-channel audio stream to be used within a professional audio system
Field-updatable firmware
- Front panel USB port provides an easy means for device updates
- Ensures long-term system return on investment
Front panel Power and Link status LEDs
- LED indicators provide power and HDBaseT link status information
- Provides easy setup and troubleshooting
Low-profile, 1 inch (25 mm) high quarter rack-width enclosure
- Easy installation into racks and confined spaces
- Keeps devices out-of-sight when placed in public spaces
Included accessories
- User guide, mounting brackets
Award-winning 10 year limited product warranty
- Ensures long-term product reliability and performance in residential and commercial systems
- Specify, purchase, and install with confidence
Resolution |
Video |
4096×2160@24/25/30/50*/60Hz*, 3840×2160@24/25/30/50*/60Hz*, 2048x1080p, [email protected]/24/25/29.97/30/50/59.94/60Hz, 1080i@50/59.94/60Hz, 720p@50/59.94/60Hz, 576p, 576i, 480p, 480i |
VESA |
2560×2048, 2560×1600, 2048×1536, 1920×1200, 1680×1050, 1600×1200, 1600×900, 1440×900, 1400×1050, 1366×768, 1360×768, 1280×1024, 1280×800 1280×768, 1152×768, 1024×768, 800×600, 640×480 |
Colorspace |
YCbCr, RGB |
Chroma Subsampling |
4:4:4, 4:2:2, 4:2:0 |
Color Depth |
8-bit, 10-bit, 12-bit |
HDR |
4K HDR10 @ 24Hz, 4:2:0 chroma subsampling, 10-bit color
(Source signal delivered from Ultra HD Blu-ray as 4K @ 24Hz 4:2:2. Not compatible with HDR10 @ 60Hz.) |
Audio |
Formats |
PCM 2Ch, LPCM 5.1, LPCM 7.1, Dolby Digital, DTS 5.1, Dolby Digital+, Dolby TrueHD, DTS-HD Master Audio, Dolby Atmos, DTS:X |
Sample Rate |
32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz |
Bit Rate |
up to 24-bit |
Distance |
CAT5e/6 @ 4K |
up to 70 meters |
up to 230 feet |
CAT6a/7 @ 4K |
up to 100 meters |
up to 328 feet |
CAT5e/6 @ 1080p |
up to 100 meters |
up to 328 feet |
HDMI IN/OUT @ 4K |
up to 5 meters |
up to 15 feet |
HDMI IN/OUT @ 1080p |
up to 10 meters |
up to 30 feet |
Signal |
Bandwidth |
10.2 Gbps |
CEC |
Pass through |
HDCP |
Supports up to 2.2 |
Temperature |
Operating |
0°C to 50°C |
32°F to 122°F |
Storage |
-20°C to 60°C |
-4°F to 140°F |
Humidity |
20 to 90% non-condensing |
Power |
Consumption |
15.2W (when paired with RX) |
Supply |
Input: AC100~240V 50/60Hz
Output: DC 48V/0.83A |
Dimension |
H x W x D |
25 x 109 x 127 (mm) |
0.98 x 4.29 x 5 (inch) |
w/ears |
27 x 119 x 127 (mm) |
1.06 x 4.69 x 5 (inch) |
Weight |
Unit |
0.39kg |
0.86lbs |
Certification |
Power Supply |
CE, FCC, RoHS, cULus, RCM, CCC |
Product |
CE, FCC |
* 4096×2160@50/60Hz & 3840×2160@50/60Hz supported @ chroma subsampling 4:2:0 8-bit only
| Loading… |
WARNING: This product contains chemicals including Styrene which is known to the state of California to cause cancer, and Bisphenol A (BPA), which is known to the state of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
In certain instances promotional prices will be offered listed above as a “Price with Rebate”, and are typically dated. In these cases Instant Rebate (IR) pricing is good sometimes only for the day only or only for the week. In order to be eligible for IR pricing – the order must be paid for AND picked up/shipped out. If you are placing an online order outside of business hours within your respective time zone, please add a note to your order for the team to confirm the pricing, or contact the branch the following business day to ensure that the item pricing carries over into the subsequent period. If an alternate branch location is still open in another time zone, please reach out to that group.
|