Ethernet over Coaxial cable for four POE IP cameras
HIGHWIRE QUAD integrates Veracity's HIGHWIRE Ethernet over coaxial cable technology with a four-port POE switch. This means that up to four IP cameras can be installed in place of an old analog video camera. Legacy coax cabling can be used as a network connection, and an existing 12VDC or 24VAC supply can be converted into universal Power over Ethernet (POE) for the new IP cameras.
Range:
- Auto-optimizing for all 75 Ohm coaxial cable:
- 280m (920ft) full-rate over video-grade RG-59 (Up to 350m depending on quality)
- 350m (1150ft) full-rate over RG-6
- 500m (1640ft) full-rate over RG-11
Network:
- 4-port unmanaged Ethernet switch
- Auto-configuring for speed (10BASE-T or 100BASE-T) and duplex
- Use with Cat 5, Cat 5e or Cat 6 patch or crossover cables
POE out:
- IEEE 802.3af compliant PSE
- Max power out 30W, isolated
- (Allocated by IEEE power class)
Power in:
- Auto type and polarity detection with detachable screw terminal connector
- 10-40V DC (max current 3.2A at 12V)
- 20-28V AC (max current 1.6A at 24V)
Dimensions:
- 92 x 111 x 32mm (3.62 x 4.37 x 1.26in)
- 107 x 140 x 32mm (4.21 x 5.51 x 1.26in) including connector and mounting lugs
- 290g (10.2oz)
 | Loading… |
|