301111 - Wilson Cellular Yagi (806MHz-896MHz) Cell Phone Antenna
The Wilson Cellular Yagi Antenna's main benefit over our other antennas is its ability to focus its signal in one direction. This provides an advantage in weak signal areas or for repeater systems. This antenna is designed for use on stationary objects such as buildings. If this antenna is not aimed correctly it will lose its effectiveness.
Since the 301111 Yagi is a single band 800MHz antenna it will only work with 800MHz Cellular and iDEN (Nextel, Southern LINC, Mike) signals. It will not work with T-Mobile, Sprint PCS, or other 1900MHz signals.
Does not include pole/mast - see FMW4-YMST4: Laird 4' x 1-1/4" Aluminum Mast and 4" Standoff Wall Mounts (2 Brackets)
Cable
The antenna includes no cable. For a short run of 20' you can use our 20' RG-58 coax extension which has the appropriate connections for the Yagi. Please note that our other RG-58 cables can not be directly connected to the Yagi antenna.
For longer runs, we suggest using one of the lengths of LMR-400 Cable below. This cable is fairly stiff so if you plan on connecting the Yagi directly to your phone with an antenna adapter we suggest you also include an 5' RG-58 extension. The below cables may also be connected together using the N-Female to N-Female barrel connector.
The primary difference between RG-58 and LMR-400 is the dB signal loss. RG-58 loses approximately 12dB/100' while LMR-400 loses about 4dB/100' (which is a big difference).
LMR-400 Extensions Cables:
A phone adapter cable is required to connect Wilson Cellular antennas to your phone.
Features:
Requires:
- Phone Adapter Cable: All Wilson Cellular Antennas require a phone adapter cable in order to connect to your cell phone