HDBaseT 2.0 Extender with USB, 4K 100m/328ft with Dual 10/100 Ethernet and 2W Audio

• Featuring HDBaseT 2.0 offering the very latest in single cable transmission technology
• HDCP 2.2 compliant
• 4K transmission (4096x2160@60hz/4:2:0) to 100m/328ft
• 1080p transmission (1920x1080p@60Hz/48bit) to 150m/492ft
• 5Play compliance supporting the extension of 4K and HD video, HD audio, Ethernet, Control and power along a single Cat6 cable
• Dual USB 2.0 pass-through offering full data transfer capability and KVM functionality with single host and dual device ports on both TX and RX
• Dual Ethernet ports on Transmitter and Receiver for 10/100 LAN connection of three devices per extender pair
• Bi-directional S/PDIF to both units sends and receives digital audio signals at either end
• Two-way PoH enables either device to be powered remotely
• DIP Switch selection for direction of USB control, long cable mode and firmware update
• Audio embed on Transmitter and audio de-embed on Receiver via 3.5mm jack connection
• Backwards compatible with HDBaseT 1.0 Transmitters or Receivers
• 3D supported
• Cable termination follows IEEE-568B standards
• LED indication for power supply to units, signal status to show established display connection, HDCP presence in signal and transmission link.
• Threaded bushings allow use of both standard and locking DC power plugs
• Phoenix port for additional power connection
• Energy efficient universal power supply included
• Mounting brackets included

Audio Formats: 2ch analog and Up to 7.1 DTS Master HD and Dolby True HD

Video Resolution: 1920x1080@60Hz (1080p60) | 4096x2160p@60Hz 4:2:0

Color Depth: 48bit (1080p)

Maximum Pixel Clock: 297MHz

HDBaseT: HDBaseT 2.0 | HDCP 2.2 | EDID | PoH | Bi-directional IR and RS-232

HDMI: HDCP 2.2 | EDID | DVI/D supported with adapter (not included)

Ethernet: 10/100 Mb/s auto-negotiating

IR: Bi-directional over HDBaseT

RS-232: Bi-directional over HDBaseT

USB: Local Host Control | Remote Host over HDBaseT

Power Supply: Input: 100~240V AC 50/60Hz | Output: 12V DC 2A

Max Power Consumption: 26.5W

PoH: 48V 15.4W

Operating Temperature: 32°F ~ 113°F (0°C ~ 45°C) | 10% ~ 90%, non-condensing

Storage Temperature: -4°F to ~ 158°F (-20°C ~ +70°C) | 10% ~ 90%, non-condensing

Safety and Emission: CE | FCC | RoHS