HDBaseT 8x8 HD Matrix

The WyreStorm Pro-Plus range builds upon the popularity of our Pro range of dual Cat5ei HD Matrix Products and our full HDBaseT™ matrix range to offer the very best in affordable single cable AV distribution and control.

The WyreStorm MX-0808-PP-POH Pro Plus Matrix takes HD video & audio distribution and control to a new level with this HDBaseT performance switching solution, now offered at a more affordable price point. The MX-0808-PP-POH 8x8 matrix builds upon the strong feature set of WyreStorm’s standard Pro Plus (PP) models, with the addition of Power Over HDBaseT and Routed RS232 functionality that brings significant value to any installation. With 70m/230ft HDBaseT transmission of full HD video, audio, bidirectional IR control, Power-over-HDBaseT (PoH) and RS232 routing capabilities, the matrix provides system integrators with an out-of-the-box, high-performance switching solutions that provides greater integration flexibility to create a total distribution systems of virtually any size.

Features

• 8 HDMI Inputs & 8 HDMI Outputs over Cat5e/6 (plus additional 8 duplicate HDMI ports mirrored to HDBT Outputs)
• Single cable output for all HD Video/Audio using HDBaseT platform with bi-directional IR control
• Additional control via LAN, RS232 and RS485
• Full EDID Management (Including full 3D), HDCP Compliant
• Compact 2U Design with integrated PSU
• Display Receivers RX-70-IR-PP powered by mains or USB from display (SOLD SEPARATELY)
• Slot-in card design for easy upgrade (more card options becoming available)
• Drivers available for all main control systems
• 70 meter transmission distance
• Works with virtually all control systems (IR & RS-232)
• Routable RS-232 (Each HDBaseT out can send a discrete signal to the receiver balun to control the display using RS-232)
• Power Over HDBaseT functionality to eliminate the need for a wall-wart at the display to power the receiver balun

• Quick and easy installation – set up in seconds straight out of the box.
• Simplified ports - Input: HDMI – Output: Simultaneous HDMI and integrated RJ45 connectors for a single Cat5ei/6/7 UTP cable to each display point for ease of installation

The inclusion of duplicate HDMI ports essentially doubles the number of outputs (though slaved to the output channel on the matrix), or allowing connection to Coax, Fibre or full HDBT extender sets for increased flexibility and length of distribution.

• Conforms to IEEE-568B standards.
• Each HDMI port also supports DVI inputs.
• Enables up to 8 HDMI video/audio devices to be independently switched through up to 8 HDMI displays or projectors for uncompressed digital distribution.
• Each output able to show any connected source simultaneously regardless of whether the input carries HDCP encryption.
• HDCP compliant with constant feed to prevent screen drop-outs.
• Refined for Custom Install and Home Theatre Installations.
• Reads and copies EDID from connected devices with additional EDID configuration through customizable DIP switch settings if necessary.
• The same robust transmission technology as full HDBT that is far more resistant to electrostatic interference than conventional non-HDBT distribution.
• HDMI v1.4 with full 3D compatibility with frame packing/ frame sequential (Blu-Ray) and interlaced Stereoscopic (satellite/cable broadcasts).
• Central RS232 control – fully compatible with all market leading control systems with full integration protocols available for AMX, Control 4, Crestron, Red Eye, Nevo, RTI, Control FX, Savant, Bit Wise.
• LAN control – with Control 4 LAN protocols.
• Wide range, two-way discrete IR control between source and display and vice versa (30 KHz to 56 KHz frequency)
• 2K resolution (compared to 4k resolution with full HDBaseT).
• 36bit Deep Colour supported (compared to 48bit with Full HDBaseT, and 24bit PRO).
• 6.75 Gbps bandwidth range/signalling rate (compared to 10.2Gbps with full HDBaseT).
• 70m/230ft distance range of matrix/extenders – (compared to 100m/328ft HDBaseT or 50m/164ft PRO)Under perfect transmission conditions*

(Can be lengthened by connecting to multiple 70m/230ft extender sets or used with any other Wyrestorm extenders, such as Coax, full HDBT or Fibre)

• Each Output port can be fed to multiple displays (cascaded).
• Supports all high definition resolutions up to and including 1080p and standard video formats.
• Choose from 5 switching modes – infrared remote control, front panel buttons, local IR, IR call-back, and RS232.
• Simple switching remote control included, which can also be learned into a universal remote handset to allow the control of multiple devices from one handset.
• 8 x IR 3.5mm mini-jack ports for each output.
• Additional infrared extension port for longer IR connections
• Pack comes complete with 1 x MX0808-PP 8x8 matrix unit with 19”, IR receivers, emitters and a remote control handset.

*Perfect transmission conditions denote cable run is within specified distance range of product, no electrical interference, the use of straight cable runs with no bends or kinks and no patch panels or wall outlets used. Please be advised that the presence of any of these factors in your installation may compromise bandwidth and signal strength. For longer transmission distances, LAN control and Ethernet pass-through, please see our full HDBaseT or HDBT Lite range of matrices, transmitters, receivers and extender sets.

Specifications

IN THE BOX

1 x WyreStorm MX-0808-PP-POH Pro Plus Matrix
1 x Mounting brackets (pair)
8 x IR emitters 8 x IR Receivers
1 x Remote control
1 x Manual
1 x USB serial cable