WyreStorm NetworkHD 100-Series HDMI Over IP Encoder
Overview:
The NetworkHD 100-Series is a matrix-based H.264 HD over IP AV distribution platform. With its simple system
configuration and robust feature set, it provides the best value in networked video distribution, without compromising quality.
The NHD-100-TX H.264 encoder is intended for use with an NHD-100-RX H.264 decoder.
Moving on from the first generation of WyreStorm NetworkHD™ using JPEG2000 technology, HD over IP takes a great leap forward for
ProAV integrators with the NetworkHD 100-Series utilizing H.264 compression for the ultimate in high quality, low bandwidth, highly
expandable modular HD distribution over a network. An Ethernet-based HD-over-IP AV matrix distribution platform offering
robust and infinitely scalable matrix distribution over a network, NetworkHD
100-Series takes its cues from its previous JPEG2000 incarnation built around a modular and highly
scalable infrastructure design that easily allows the number of sources or zones to be expanded by simply adding more
transmitters or receivers, with this next generation of NetworkHD offering a total convergence between
IT & Audio Video design.
A flexible, multipurpose IP Network distribution system, NetworkHD 100-Series offer modular system architecture and PoE that removes
the limitations of a traditional fixed platform matrix system whilst offering significant cost savings when
designing large scale infrastructure systems. With low latency and low bandwidth demands, the 100-Series
offer source HDMI to H.264 encoding, switching, decoding and control with the NHD-000-CTL control unit for
content streamed simultaneously through a network switch over conventional LAN without conflicting with other IP
devices that might be present to offer super-efficient bandwidth management to make it
the perfect tool to manage very large installations over existing LAN infrastructure.
Comprising of the NHD-100-TX Encoder and NHD-100-RX Decoder, the NetworkHD 100-Series offers a highly scalable
HD Over IP AV distribution solution for matrix switching over an Ethernet infrastructure, with a simple system configuration and a
robust feature set to provide the best possible value in networked video distribution without compromising quality.
Utilizing the most efficient compression technologies to allow for the largest of commercial AV deployments, the
100-Series features high quality low-bandwidth AV distribution with plug and play setup and Bonjour auto-discovery
of components for quick networking configuration.WyreStorm’s Quick Sync™technology offers virtually instantaneous, seamless
switching with full RS232 control of connected displays and CEC One-Touch Play, and major control system driver availability,
including the WyreStorm Enado Control System. Offering considerable cost and scalability advantages over competing products,
as well as an unmatchable ease of installation, the 100-Series is what HD-Over-IP has been waiting for.
Key Features
- Highly scalable, high quality low-bandwidth solution using the most efficient compression technologies to allow for very large
commercial AV deployments
- Streams HDMI signals over IP networks
- Plug and Play setup with quick networking configuration and auto discovery of components
- Quick Sync technology for virtually instantaneous seamless switching
- Full RS232 control of connected displays and CEC One-Touch Play
- Major control systems drivers available including the WyreStorm Enado Control System
- NetworkHD Touch iPad control app for live video previews and drag and drop source selection
Features
- For use with the NHD-100-RX H.264 decoder to provide a complete end-to-end streaming system
- Features 1 x HDMI input to 1 x LAN (PoE) output
- Provides streaming output via Ethernet port
- Supports input signal resolution up to 1920 x 1200@60Hz
- Highly scalable, high quality low-bandwidth solution using the most efficient compression technologies to allow for very large
commercial AV deployments
- Plug and Play setup with quick networking configuration and auto discovery of components
- Quick Sync™ technology for virtually instantaneous seamless switching
- Full RS232 control of connected displays and CEC One-Touch Play
- Major control systems drivers available including the WyreStorm Enado™ Control System
- Supports video previewing on a PC or third party device. Capable of outputting two simultaneous IP streams. One large IP
stream supports a streaming resolution from 480p @ 60Hz to 1920 x 1200 @ 60Hz to view a video on the decoder.
The other small one supports resolutions of 352 x 288 @ 5Hz to easily preview a video from the encoder on a PC or Mac
- Use with the new NetworkHD controller (NHD-000-CTL) for matrix control and management via the LAN, as well as for allowing
control from third party control system such as AMX, Crestron, Control4, RTI & Enado.
- Supports PoE to be remotely powered from the switch by compatible power source equipment, eliminating the need for a nearby power outlet
- Standards-based H.264/MPEG-4 AVC video compression
- Full PC control suite available free of charge at wyrestorm.com
- Supports HDCP
- Supports the H.264 features baseline profile, main profile and high profile
- Auto input format detection
- Configurable encoding bit rate up to 40 Mbps
- Supports AutoIP, zero-configuration networking (zeroconf), a set of technologies that automatically assigns dynamic
Specs
Operating Temperature: +32°F ~ +113°F (0°C ~ +45°C) 10% ~ 90%, non-condensing
Storage Temperature: -4°F ~ 140°F (-20°C ~ +70°C) 10% ~ 90%, non-condensing
Input Video Ports: 1 × HDMI IN
Input Video Type: HDMI 1.3
Input Video Resolution:
HDMI: 640 x 480 @ 60Hz, 480i @ 60Hz, 480p @ 60Hz, 576i @ 50Hz, 576p @ 50Hz, 800 x 600 @ 60Hz, 1024 x 768 @
60Hz, 720p @ 50Hz, 720p @ 60Hz, 1280 x 800 @ 60Hz, 1280 x 1024 @ 60Hz, 1360 x 768 @ 60Hz, 1366 x 768 @ 60Hz,
1400 x 1050 @ 60Hz, 1440 x 900 @60Hz, 1680 x 1050 @ 60Hz, 1080p @ 24Hz, 1080p @ 25Hz, 1080p @ 30Hz, 1080p
@ 50Hz, 1080p @ 60Hz, 1920 x 1200 @ 60Hz
Output Video Ports: 1 x LAN
Output Video Type: H.264/MPEG-4 AVC
Output Video Resolutions: Large IP stream: 480p @ 60Hz ~ 1920 x 1200 @ 60Hz, Small IP stream: 352 x 288 @ 5Hz
Video Impedance: 100 Ω
Encoding Data Rate: Up to 30 Mbps, configurable
End-to-End Time Latency: About 60 ms-90 ms (Low latency mode), About 250 ms-300 ms (High quality mode)
Input Audio Format: Stereo (from HDMI)
Output Audio Ports: 1 x Phoenix Connector
Output Audio Format: Stereo
Control Method: Rear panel source switch, PC configurator and RS232
ESD Protection: ±8kV (air-gap discharge) ±4kV (contact discharge)
Surge Protection: Voltage ±1 kV
Certification: CE, FCC, RoHS compliant