50m (164ft) HD over SDI Cascading Receiver with
2-Way IR & RS232
Receiver Only - Transmitter sold separately.
The WyreStorm RX-SDI-50 is single cable HDMI over SDI cascading display receiver capable of receiving transmissions of
lossless 1080p HD video@60Hz and multi-channel HD audio up to 50m (164ft) using copper-core 75Ohm coax from a compatible
transmission device, such as the TX-SDI-50 transmitter as part of the EX-SDI-50 extender set.
Featuring full 3D compatibility and 24bit True Color with wide-band, two-way control from either source or display location via IR and RS232 with full
support for leading third party control systems, the RX-SDI-50 also includes SDI Loop out that enables up to 7 receivers to be daisy-chained for a total distribution of up to 350m/1148ft from a single output.
The RX-SDI-50 includes embedded EDID/SETTING functionality to manage the EDID handshake between devices and manually set audio and video settings to aid communication and help avoid compatibility issues that can effect successful signal transmission.
Although capable of receiving a signal from ant SDI transmission device using 75Ohm WF100 coax cable, the RX-SDI-50 is designed to be used
as part of an EX-SDI-50 extender set, with HD signals distributed by a TX-SDI-50 transmitter.
The TX-SDI-50 features twin synchronous SDI outputs to enable the signal to be sent in two different directions to create a cascadable splitting system feeding different locations by pairing a single transmitter with multiple cascaded RX-SDI-50 receivers to create create larger, multi-location distributions spanning total distances of 700m/2296ft. (additional receivers sold separately)
The RX-SDI-50 is designed for residential or ProAV applications where use of coax to distribute and control HD signals is either required due to retrofit installations where existing coax cabling infrastructure must be used, or preferred for its low loss at high frequencies; vital for cable/satellite television, cable modem installations as well as commercial applications such as security/surveillance, broadcast television and film production in studio or location, video conferences, electronic teaching, in fact, any and wired network area where the extension and amplification of SDI transmission is needed.
Key features include:
- Single coax cable as a substitute to HDMI cable to achieve scaleable long-distance transmission of full HD video, audio and two-way control
- Full HD support 1080p@50/60Hz
- 1080p transmission distance up to 50m/164ft (75Ohm WF100 coax cable) under perfect conditions*
- 24bit colour depth
- Fully 3D compatible - frame packing/sequential (Blu-Ray), interlaced stereoscopic (satellite/cable broadcasts)
- Wide-band, bidirectional infrared control signal of source from display and display from source locations transmitted together with the HDMI signal
- RS232 control signal transmissions supported
- SDI loop out on receiver allows transmission to be cascaded by daisy-chaining up to 7 receivers to further lengthen distribution from a single output distances
up to 350m/1148ft or 700m/2296ft from both synchronous outputs of a connected TX-SDI-50 transmitter
- SETTING Management to assist audio/video setting communication between source/display and avoid compatibility issues
- HDMI V1.4 supported
- HDMI port also supports DVI signals
- Auto-adjustment of feedback, equalization and amplification
- HDCP compliant
- LED indication of power and signal status
- Contains ESD protection technology to safeguard against static build-up that can damage circuitry
- Mini-USB port for firmware upgrade
- Units can be cascaded up to 7 times to create larger distributions
- Mounting brackets supplied for secure installation
- IR emitter, receiver and 5v mains power supply included
*Perfect transmission conditions denote - straight cable run within specified distance range of product, no electrical interference
and the use of solid copper core cable with no bends or joins. Please be advised that the presence of any of these factors in your
installation may compromise bandwidth and signal strength.
Specifications:
118mm/4.6" x 25mm/0.98" x 157mm/6.2"
0.46Kg / 1.01lb
-5 to +35°C (-41 to +95 °F)
5 to 90 % RH (no condensation)
6.75Gbps
0.5-1.0 volts p-p
5 volts p-p (TTL)
1080p 24bit colour depth
Video Format Supported:
DTV/HDTV: 640x480p 60Hz, 800x600 60Hz, 1024x768 60Hz, 1280x768 60Hz,1360x768 60Hz, 1280x960 60Hz, 1280x1024 60Hz,
1400x1050 60Hz, 1440x480i 60HZ, 720x480p 60Hz, 1440x576i 50Hz, 720x576P 50Hz, 1440x576P 50Hz, 1280x720p 50Hz/60Hz,
1920x1080i 50/60Hz, 1920x1080p 24/25/30/50/60Hz, 1280x720p 3D 50/60Hz, 1920x1080i 3D 50/60Hz, 1920x1080p 3D 24Hz
HDMI1.4+HDCP
5.1 / 7.1 / stereo audio (including PCM and non PCM, HD Audio, etc.)
5V/3A DC
8W
N/A
In the box:
1 x RX-SDI-50 Receiver
1 x Printed user manual
(downloadable from product web page)
1 x 5V/3A DC power supplies (for each unit)
1 x IR RX receiver (for connection to display
Compatible Control Systems
