WyreStorm 10 x 1 HDBaseT Presentation Switcher with 2-Mic Control and CEC

The SW-1001-HDBT multi-format HDBaseT presentation switcher enables the connection and switching of up to 6 HDMI, 1 Display Port, 1 HDBaseT and 2 VGA sources with embedded audio onto the output signal for the VGA sources with an internal scaler ensuring instant source switching by matching the resolution of the display device up to 1920x1200p.

Featuring adjustable microphone inputs with selectable phantom power able to be mixed with the source audio and sent via the line-level output, the SW-1001-HDBT includes both HDMI output for local connection or HDBaseT output for transmission over distances up to 100m/328ft, along with PoH, Ethernet and control all sent to a WyreStorm RX-70-4K receiver (sold separately).

Key Features:

• Features auto scaler to output the most best resolution from 640x480 to 1920x1200 @ 60Hz based on the EDID of the display as well as different fixed resolutions
• CEC compatibility to enable CEC-enabled devices such as TVs enter standby mode and return to their normal working state without user intervention - functionality also possible via rear panel RS-232
• Supports two microphone inputs, two stereo audio inputs and one auto-mix stereo audio output
• 6 HDMI, 1 DisplayPort, 1 HDBaseT IN and 2 VGA audio source inputs to duplicate HDBaseT and HDMI outputs
• Choose from various control methods: front panel buttons, LAN (Telnet & Web GUI) and RS-232

The SW-1001-HDBT and its little brother, the SW-0501-HDBT, both offer multi-format input to HDBaseT output supporting transmission of the 5Play feature set including PoH, Ethernet and serial control up to 100m/328ft, and duplicate HDMI output for fast, seamless switching and auto-scaling up to 1920x1200.

Featuring auto-switching support, obeying LIFO (Last In First Out), the SW-1001-HDBT features six HDMI inputs, two VGA, DisplayPort and an HDBaseT input supporting Ethernet, bi-directional and serial control and PoH to enable central powering of a connected remote HDBaseT transmitter.

Audio is covered via stereo audio inputs for both VGA embeds passed with transmissions and audio breakout for variable pre-out connection to power amplifiers with no in-built volume control. Dual external microphone inputs also independently embed audio over any video source supporting both dynamic or condenser mic with phantom power, downmix audio outputs and manual mic gain controls via front panel.

Control is offered via front panel buttons, RS-232 or LAN with API command support, while automatic CEC trigger is featured on outputs to send power commands to display devices via CEC or RS-232 according to the status of input sources for effective energy-saving on displays that do not need to be active, with built-in Web UI for customization of display device power on/off and advanced settings.

All of which adds up to a powerful presentation switching proposition, with the SW-1001 perfectly suited to medium-to-large scale commercial applications such as conference room environments or lecture halls.

• Allows up to ten multiformat inputs to be switched to two mirrored outputs
• 6 HDMI, 1 DisplayPort, 1 HDBaseT IN and 2 VGA audio source inputs to duplicate HDBaseT and HDMI outputs
• Fast, seamless switching between HDMI and VGA inputs
• Local mirrored HDMI output and HDBaseT output with transmission distance up to 100m/328ft to compatible display receiver
• PoH on HDBT IN and OUT remotely powers HDBaseT Transmitter and Receiver to eliminate local power access at either location
• Features fast, seamless switching between HDMI and VGA inputs with QuickSync technology
• Supports input resolution up to 1920x1200@60Hz
• Unit remembers the connected sequences of each input - follows the Last-In-First-Out rule, always outputting the most recently connected active source
• Auto-scaler outputs the most suitable resolution for connected devices from 640x480@60Hz to 1920x1200@60Hz based on the display device EDID as well as different fixed resolutions for selections
• Follows Last-In-First-Out rule: always outputting the most recently connected active source
• Dual microphone inputs with phantom power supporting dynamic or condenser mics
• 2x stereo audio input (VGA source only) and 1x auto mix stereo audio output
• Features audio embedding and de-embedding - VGA source embedded with corresponding stereo audio for A/V input with audio extracted from A/V output when switching
• Multiple control methods: front panel buttons for source selection, LAN (Telnet & Web GUI) for device control and management and RS232 for device control, debugging and power control
• Bi-directional IR and RS232 passthrough over HDBaseT output allows control of devices connected to a HDBaseT receiver over distances up to 100m/328ft from central or remote locations
• CEC compatibility to enable CEC-enabled devices such as TVs enter standby mode and return to their normal working state without user intervention - functionality also possible via rear panel RS232
• Supports multiple communications protocols such as IP, TCP, Telnet, UDP
• 3 year warranty

IN THE BOX

1 x SW-1001-HDBT 10x1 HDBaseT Presentation Switcher with 2-Mic Control and CEC

1 x Power supply (100~240V AC)

2 x Phoenix Connector (Male, 3.5 mm, 4 pins)

4 x Phoenix Connector (Male, 3.5 mm, 3 pins)

5 x Phoenix Connector (Male, 3.5 mm, 5 pins)

2 x Mounting brackets

1 x Quickstart guide (Quickstart and full manual also available to download from this product page)