800-795-5111
 

Other products by Parasound
(Tech Support Website)

View Accessories

Item #: ZM2
MSRP: No Retail
Login


ZM2 | ZONEMASTER UNIVERSAL 2 CHANNEL, 4 SPEAKER AMPLIFIER W/ SUB CROSSOVER

  • 120 watts x2 @ 8 Ω
  • 150 watts x2 @ 4 Ω or 2 Ω
  • 4 speaker connections (A and B outputs for both channels)
  • High current for stable operation at 2 Ohms
  • Class AB input stage plus premium Class D power stage
  • Audio sensing auto-on trigger
  • 12 volt auto-on trigger input
  • Looping 12 volt trigger output
  • Speaker level input for expanding systems w/out pre out jacks
  • Looping output to connect additional amplifiers
  • Mono mode combines L and R for single speaker applications
  • Separate level controls for both channels
  • Detachable speaker connectors accept up to 12 gauge wire
  • Short circuit and overheat protection with front panel indicators
  • 0.5 watt standby power consumption meets Energy Star & EU specs
  • ZoneMaster 2 Specific Features:

    • Compact 1u, 1/2 width chassis size
    • "ZRK" Rack mount kit sold separately
    • Full Range Mono RCA Output
    • 80Hz low pass Mono RCA output (for sub)
    • Built in 80Hz low pass filter in bridged mode for driving in-wall/in-ceiling woofers or passive sub(s)

     

    Power Output – RMS, Both Channels Driven (20 Hz - 20 kHz) 
    120 watts x 2 @ 8Ω 
    150 watts x 2 @ 4Ω or 2Ω

     

    Minimum Speaker Impedance: 
    A+B Outputs of a Single Channel: 2 Ω 

    Note: Continuous operation at this minimum impedance might require additional ventilation for the amplifier.

     

    Frequency Response: 
    20 Hz - 20 kHz, +0/-0.25 dB 
    5 Hz - 50 kHz, +0/-3 dB

     

    Total Harmonic Distortion: 
    < 0.05 % at typical listening levels 
    < 1.0% at full power

     

    Interchannel Crosstalk: 70 dB at 20 kHz

     

    Total Gain: 29 dB (Level controls set to Maximum)

     

    S/N Ratio: >112 dB, input shorted, IHF A-weighted

     

    DC Trigger Requirements: +9 Vdc to +12 Vdc, 5 mA

     

    Audio Trigger Requirements: 2 mV audio signal

     

    Low Pass Crossover: 80 Hz, 18 dB per octave

     

    AC Power Requirement: 
    300 Watts maximum 
    30 Watts typical (music playing) 
    15 Watts idle (no music playing) 
    0.5 Watts in standby 
    100-250 VAC 50/60 Hz (automatic)

     

    Dimensions:
    Width: 8.5" (220 mm) 
    Depth: 10" (254 mm) 
    Depth: 12" (305 mm) with AC cord and cables connected 
    Height, with feet: 2" (51 mm) 
    Height, without feet: 1.75" (45 mm), 1U

     

    Weight: 
    Net: 4.3 lbs. (2.0kg) 
    Shipping: 7.3 lbs. (3.3 kg)



    Prop 65WARNING: This product contains chemicals including Styrene which is known to the state of California to cause cancer, and Bisphenol A (BPA), which is known to the state of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.



    In certain instances promotional prices will be offered listed above as a “Price with Rebate”, and are typically dated. In these cases Instant Rebate (IR) pricing is good sometimes only for the day only or only for the week. In order to be eligible for IR pricing – the order must be paid for AND picked up/shipped out. If you are placing an online order outside of business hours within your respective time zone, please add a note to your order for the team to confirm the pricing, or contact the branch the following business day to ensure that the item pricing carries over into the subsequent period. If an alternate branch location is still open in another time zone, please reach out to that group.


    New Project

    Print Project

    PrintProject

    Volutone