AT2007 RM

This is the rack-mount version of the AT2007

Designed by legendary amplifier engineer, Morris Kessler, the AT2007 is a fully balanced differential amplifier. This elegant topology is basically two separate amplification circuits for each channel. One circuit amplifies the positive half of the audio signal while the other amplifies the negative half. They are combined at the output with tremendous benefits: any noise coming in from external sources, such as radio-frequency and electromagnetic interference is eliminated; noise is reduced by 50%; the speed (slew rate) of the amplifier is doubled for better reproduction of high frequencies and better transient performance. Output power for the 2000 series is conservatively rated at 200 Watts RMS/channel into 8 Ohms from 20Hz to 20kHz with no more than 0.03% THD and I.M. distortion and 300 Watts RMS per channel at 4 ohms under the same conditions. Each model in the 2000 series has two toroidal power transformers with 30,000 microfarads of power supply capacitance per channel Other features making it installer-friendly are: a detachable IEC power cord, optically coupled protection circuits, soft-start circuit, 12-volt trigger, peak clipping indicator and convection cooling.

All ATI amplifiers are designed, engineered and assembled in the United States.

AT2007RM 200W RMS x 7, All channels driven, 20Hz-20 kHz, 8 ohms <0.03% THD
Dimensions: 17” x 7” x 17”
Weight: 103 lbs Shipping weight: 110 lbs.
Warranty: 7 years, parts and labor.