800-795-5111
 

Other products by AVPro Edge
(Tech Support Website)

View Accessories

Item #: ACMXNET1GAVDME
MSRP: $1,349.00
Login


MXNet 1G DOWNMIXING ENCODER
(AC-MXNET-1G-AVDM-E)

 

The AC-MXNET-1G-AVDM-E Encoder is the audio processing and downmixing cousin to our standard-issue AC-MXNET-1G-E Encoder. As with our standard Encoder, this is where the signal starts. However, the AC-MXNET-1G-AVDM-E Encoder was specifically designed to integrate with multi-zone stereo/mono audio mixing systems. The AC-MXNET-1G-AVDM-E Encoder employs a specialized audio processor chipset that can accept and decode Dolby ATMOS, DTS-HD, and other lossless audio formats - and output those signals as stereo through the provided balanced stereo terminal block on the unit.

 

The AC-MXNET-1G-AVDM-E will encode a full 4K 4:4:4 60Hz HDMI video signal – along with audio, control, power, and HDR metadata signals. These signals are passed to single or multiple Decoder endpoints via multicast routing through an MXNet or multicast compatible L3 managed network switch. And, it does all this with next to zero latency. MXNet Encoders encode audio/ video/control signals into IP packets using an optimized JPEG2000 codec at a flexible data rate (200Mbps for 1080p content, 300Mbps for 4K30 content, 850Mbps at peak).

 

The AC-MXNET-1G-AVDM-E Encoder also supports stand-alone point-to-point applications when connected directly to an AC-MXNET-1G-D Decoder. The AC-MXNET-1G-AVDM-E Encoder is only one part of the MXNet Ecosystem that includes Encoders, Network Switches, Control Processors, and other various components designed to facilitate the building of a custom A/V distribution system. MXNet’s Ecosystem includes formatting such as resolution scaling, full EDID management, HDR and Dolby Vision metadata, multifaceted video walls, and includes the MXNet Mentor setup and control tool - making installations easy on the integrator, while also presenting a major WOW factor for your client.

 

• 1G Maximum Data Rate
• Object and lossless audio format stereo downmixing
• Bandwidth management via MXNet Mentor
• Uses any standard category cable (CAT 6A or better)
• SPF Fiber Connection for Long Runs
• Built-In “Data Window” OLED display
• USB/KVM Host support
• Full Exterior Light Control (for discreet Installs)
• RS-232 and IR Direct Routing to one or many Decoders
• RS-232 over IP serial passthrough support


New Project

Print Project

PrintProject

Volutone