Z-Wave Interchangeable Paddle In-wall Dimmer (1000W)

Key Features
 Turn ON/OFF and control the brightness level of the connected lighting manually or via
Z-Wave remote control.
 May be used in single pole installation or with up to three 45710 (ZW2004) auxiliary
switches in 2-way, 3-way or 4-way wiring configuration
 Blue LED indicates switch location in a dark room
 Can be Included in multiple Groups and Scenes
 Supports Advanced Configuration; Dim rates, LED status, Invert switch (if unit is installed
upside down)
 Screw Terminal installation; requires wiring connections for Line (Hot), Load and Ground.
Traveler wire required for multi pole installation
 For use with Incandescent loads only; not intended for use with CFL or LED bulbs
 Use a standard-size wall plate for single gang installations (wall plate not included); Multigang
box option available (removable ‘side wings’)
 Interchangeable Paddle switch: White & light almond paddle in package
 LED can be enabled/disabled manually
 Inline traveler circuit protection
 White box contractor packaging
 UL Listed

SPECIFICATIONS

Power: 120 VAC, 60 Hz.
Signal (Frequency): 908.42 MHz.
Minimum Load: 40W
Maximum Load: 1000W, Incandescent
Range: Up to 100 feet line of sight between the Wireless Controller and the closest Z-Wave
receiver module.
Operating Temperature Range: 32-104° F (0-40° C)
For indoor use only.