QSC CX602V Stereo Power Amp
Features
- 8 two-channel models to meet your exact power requirements
- Three 70-volt direct models
- Five low-impedance models; the CX902 and CX1102 also directly drive 70 volt loads
- Exclusive PowerLight switch-mode power supply technology for high performance and compact size
- Custom integrated security cover for tamper proof installations
- Variable speed fan for low noise
- 1-dB detented gain controls for fast and accurate gain settings
- Active inrush limiting eliminates AC inrush current, removing the need for expensive power sequencers
- XLR and detachable Euro style input connectors
- HD15 DataPort connector for Q-Sys and QSControl computer control and monitoring
- Dip switch control for clip limiters, high pass filters, bridge mono and parallel operation
- Selectable high pass filters protect speakers and prevent speaker transformer saturation withminimal effect on program material (33 Hz or 75 Hz on non-V models, 50 Hz or 75 Hz on V models)
- Comprehensive front panel indicators including signal, clip, protect and QSC's exclusive bridge mono and parallel input LEDs
- Barrier strip output connector
- Comprehensive protection circuitry including DC, infrasonic, thermal overload and short circuit protection
- Class H complementary bipolar output circuitry for high efficiency (CX702, CX902, CX1102, and CX1202V)
- Optional external transformer accessory pack for isolated 25-, 70-, and 100-volt outputs (converts CX302 to 400 watts per channel, or 300 watts into 25 V)
- Compact size - all models are only 2 rack units high and 14" deep for reduced rack cost and floor space
- Light weight - all models weigh only 21 pounds (9.5 kg) for easier racking and shipping
- 3-year warranty plus optional 3-year extended service contract
- All CX Series amplifiers meet the European Union's 2006 RoHS directive to restrict the use of hazardous materials used in electronic devices.
| SPECIFICATIONS |
CX302 |
CX502 |
CX702 |
CX902 |
CX1102 |
CX302V |
CX602V |
CX1202V |
| |
STEREO MODE, Both Channels Driven |
| 8Ω, 20 Hz–20 kHz, 0.05% THD |
200 W |
300 W |
425 W |
550 W |
700 W |
- |
550 W |
700 W |
| 4Ω, 20 Hz–20 kHz, 0.05% THD |
325 W |
500 W |
700 W |
900 W |
1100 W |
- |
- |
1100 W |
| 2Ω, 1 kHz, 1% THD |
600 W |
800 W |
1200 W |
1500 W |
1700 W |
- |
- |
- |
| 70V, 20 Hz–20 kHz, 0.05% THD |
400 W
with IT-42* |
- |
- |
400 W |
800 W |
200 W |
400 W |
800 W |
| 70 V, 1 kHz, 0.05% THD |
- |
- |
- |
440 W |
1000 W |
250 W |
440 W |
1000 W |
| 70 V, 1 kHz, 1% THD |
- |
- |
- |
600 W |
1200 W |
300 W |
600 W |
1200 W |
| |
BRIDGED MONO MODE |
| 16Ω, 20 Hz–20 kHz, 0.1% THD |
400 W |
600 W |
850 W |
1100 W |
1400 W |
- |
1100 W |
1400 W |
| 8Ω, 20 Hz–20 kHz, 0.1% THD |
700 W |
1100 W |
1500 W |
2000 W |
2200 W |
- |
- |
2200 W |
| 4Ω, 1 kHz, 1% THD |
1200 W |
1600 W |
2400 W |
3000 W |
3400 W |
- |
- |
- |
| 140 V, 20 Hz–20 kHz, 0.05% THD |
- |
- |
- |
800 W |
1600 W |
400 W |
800 W |
1600 W |
| 140 V, 1 kHz, 0.05% THD |
- |
- |
- |
880 W |
2000 W |
500 W |
880 W |
2000 W |
| 140 V, 1 kHz, 1% THD |
- |
- |
- |
1200 W |
2400 W |
600 W |
1200 W |
2400 W |
| Noise, 20 Hz–20 kHz |
-107 dB |
-107 dB |
-106 dB |
-106 dB |
-106 dB |
-106 dB |
-106 dB |
-106 dB |
| Input Sensitivity @ 8 ohms |
1.26 Vrms |
1.23 Vrms |
1.16 Vrms |
1.17 Vrms |
1.35 Vrms |
1.26 Vrms |
1.26 Vrms |
1.26 Vrms |
| Maximum Voltage Gain |
30 dB |
32 dB |
34 dB |
35 dB |
35 dB |
35 dB |
35 dB |
35 dB |
| Output Circuitry Class |
AB+B |
AB+B |
H, 2-tier |
H, 2-tier |
H, 2-tier |
AB+B |
AB+B |
H, 2-tier |
| |
ALL MODELS |
| Distortion (SMPTE-IM) |
Less than 0.02% |
Distortion (Typical)
20 Hz–20 kHz: 10 dB below rated power
1.0 kHz and below: full rated power |
Less than 0.01% THD
Less than 0.01% THD |
| Frequency Response |
20 Hz–20 kHz, ±0.2 dB |
| Damping Factor |
Greater than 500 |
| Input Impedance |
6 kΩ unbalanced, 12 kΩ balanced |
| Input Clipping |
10 V rms (+22 dBu) |
| Cooling |
Variable-speed fan, rear-to-front air flow |
Connectors, each channel
|
Input: 3-pin XLR & 3-pin detachable terminal blocks (1 each per channel)
Output: Safety-shrouded barrier strip |
| Amplifier Protection |
Full short circuit, open circuit, thermal, ultrasonic, and RF protection.
Stable into reactive or mismatched loads. |
| Load Protection |
On/off muting, DC-fault power supply shutdown |
Dimensions
|
19" (48.3 cm) wide, 3.5" (8.9 cm) tall (2 RU),
14" (35.6 cm) deep (from front mounting rails) |
| Weight |
21 lb (9.5 kg) net
27 lb (12.3 kg) shipping |
| * An isolation transformer (the IT-42) is available for the CX302, which converts its low-impedance outputs to isolated 400 W per channel constant-voltage outputs. |
 | Loading… |
|