GX7
Power Amplifier
Power levels matched to the most popular speakers. Inputs: XLR, 1/4" TRS and phono. Outputs: Speakon® combo and binding posts.
Features
- Power levels matched to the most popular speakers used by entertainers
- Optimized for maximum real-world headroom into 4- and 8-ohm speaker systems
- Inputs: XLR, 1/4" TRS and phono input connectors for compatibility with any source
- Outputs: Speakon® combo accepts 1/4" (TS) plugs or Speakon 2- and 4-pole plugs (connects 2 poles only). Binding posts support all other speaker wiring systems
- Minimum depth chassis (10.1" / 257 mm) fits in compact, inexpensive effects racks
- Lightweight - GX3 and GX5 less than 26 lb (12.5 kg). GX7 only 15.5 lb (7 kg)*
- Detented gain controls for precise setting and matching of sensitivity
- GuardRail™ automatically protects the amplifier and loudspeakers from damage due to temperature rise or overdrive without shutting down the show
- Front panel LEDs monitor power, signal, and clipping
- Subwoofer/satellite crossover built-in
* 230V 16.5 lb (7.5 kg)
SPECIFICATIONS
8 ohms / 1 kHz (both channels driven): 725 W
8 ohms / 1 kHz (single channel driven): 800 W
4 ohms / 1 kHz (both channels driven): 1000 W
4 ohms / 1 kHz (single channel driven): 1200 W
Voltage Gain: 36.1 dB
Output Circuitry: 2-tier Class H
Power Requirements (1/8 power, pink noise at 4 ohms, 120V): 10.1 A
Frequency Response: 20 Hz–20 kHz, +0, -1 dB
Dynamic Headroom (4 ohms): 2 dB
Input Impedance: Greater than 20 kΩ (balanced)
Maximum Input Level: +24 dBu (16 V rms)
Input Connectors (each channel):
- 3-pin XLR and 1/4" TRS, balanced, parallel
- Phono, unbalanced
Output Connectors (each channel): Speakon®, 1/4", Binding posts
Amplifier and Load Protection:
- Short circuit, open circuit, thermal, RF protection
- Load protected against DC faults
Front Panel Controls and Indicators:
- Gain controls, 21 detents
- Red CLIP LEDs, proportional, 0.1% THD threshold
- Green SIGNAL LEDs, threshold 35 dB below clipping
- Blue POWER LED, AC on
Rear Panel Controls:
- Full Range / Crossover switch
- 100 Hz, 3rd order LP (sub), 2nd order HP (top)
Dimensions:
- Height: 3.5" (89 mm) 2RU
- Width: 19" (483 mm)
- Depth: 10.1" (257 mm)
Weight:
- 20V model:
Net: 15.5 lb (7 kg)
Shipping: 20.5 lb (9.3 kg)
- 230V model:
Net: 16.5 lb (7.5 kg)
Shipping: 21.5 lb (9.75 kg)
Agency Approvals: UL, CE, RoHS/WEEE Compliant