Designed with the needs of the installer in mind.

The EX-1UTP-IR-50-POH Extender set comprises of a Transmitter and Receiver to distribute full, uncompressed HD 1080p video @60Hz, HD multichannel audio with bidirectional discrete IR control of source and display from either location over distances of up to 50m/164ft using a single shielded or unshielded Cat5ei/6/7 cable.

Featuring Power-over-HDBaseT, the Transmitter draws 12v power from a mains supply and passes along the length of a single Cat5e/6/7 cable with the video, audio and control signals to power the receiver - no power access is necessary at the display location for ease of installation and connection; meaning no additional power adaptors requred and improved energy efficiency.

Transmitters include EDID management to manually handle device communication via DIP switch setting, with Receivers containing long cable mode to further encourage successful transmission. Both units also feature protection against ESD (electrostatic discharge) to further stabilise transmission with LED indication on the unit housing providing clear confirmation of power and signal link status. Both units also contain DIP settings .

Additionally, the EX-1UTP-IR-50-POH is fully cascadable, with transmission lengthened by connecting to multiple 50m/164ft extender sets for increased distribution and even greater flexibility, whatever the installation environment.

• HDBaseT extenders capable of 1080p HD @60Hz and HD multichannel audio transmissions up to 50m (164ft) under perfect conditions*
• Transmits discrete wide-band two-way IR control signal together within the HDMI signal over a single Cat5ei/6/7 cable
• Power-over-HDBaseT (PoH) - 12v Mains connected Transmitters pass power along the Cat5e/6/7 to remotely power display receivers - no additional power required at display locations.
• Fully supports 3D applications - frame packing/sequential (Blu-ray) and Interlaced Stereoscopic (satellite/cable) broadcasts
• Supports 36bit Deep Colour
• HDMI V1.4
• Cablei termination follows IEEE-568B standards
• HDCP compliant
• Automatically adjusts feedback, equalization and amplification of signal for easy installation.
• EDID management on Transmitter and DIP Setting on Receiver to aid communication between devices and transmission.
• LED indication for visual power and HDMI / HDBaseT video signal status.
• Fully cascadable to further lengthen transmission and increase your distribution capabilities.

*Perfect transmission conditions denote straight cable runs with no electrical interference, bends, kinks, patch panels or wall outlets.