HDBaseT Receiver 70m/230ft with PoH

Using the very latest Class B HDBaseT platform, products in the Pro Plus range provide single cable transmission of 1080p HD Video @60Hz, including full frame-packing 3D, HD multichannel audio and bidirectional control of source and display from either location via discrete IR and routable RS232 from a centralized AV location forserial control of displays located up to 70m/230ft away using unshielded or shielded Cat5ei/ Cat6 cable with full compatibility and integration offered with leading third party control systems.

The WyreStorm RX-70-IR-POH display receiver has been designed to offer a more affordable and convenient HDBaseT solution over distance; intended in particular for small-medium sized projects that may not require the feature set or range of full HDBaseT yet still benefit from the signal stability and functions offered by this powerful single-cable transmission technology.

As part of the Pro Plus range, the RX-70-IR-POH receives transmissions and power from an HDBaseT PoH-enabled device such as a transmitter, any matrix from the MX-PP-POH range, or even allow power to passthrough using the AMP-001-010 Digital Amplifier for distribution of full, uncompressed HD video, audio and control signals without mains power required at display points. This not only offers more flexibility and convenience during installation but also greater energy efficiency than a permanent mains connection as receivers are only powered when the transmission device is in operation.

All of which adds up to an incredibly powerful package for residential and commercial applications of any size or budget.

WyreStorm Pro Plus PoH HDBaseT products offer incredible flexibility and stability of signal distribution combined with innovative features and an ease of use that provides solutions where stable HD transmission and control over distance is required, whilst also eliminating the need for local mains power supply as well as additional control and video cables on installation, whether in a residential or commercial setting

• Receivers capable of 1080p HD video @60Hz and HD multichannel audio transmissions up to 70m/230ft under perfect conditions*
• Transmits discrete wide-band two-way IR control signal together within the HDMI signal over a single Cat5ei/6/7
• Robust Class B HDBaseT transmission technology for more affordable HD distribution and control whilst retaining the trademark HDBaseT stability and resistance to electrostatic and environmental interference compared to conventional UTP transmission
• Power-over-HDBaseT for receivers to draw power directly from the transmission device. No mains power supply required at display location
• Supports all high definition resolutions: 1080p, 1080i, 720p with screen refresh rates of 24Hz, 30Hz, 50Hz and 60Hz
• Centralized Routed RS232 for serial control of display devices, including third party control with open source integration protocols available for market leading control systems
• Output zone (7 x 70m/230ft) using another Class B HDBaseT transmission device
• Fully supports 3D applications (frame-packing/sequential – Blu-ray and Interlaced Stereoscopic – Satellite/cable broadcasts)
• Supports 36bit Deep Colour
• HDMI V1.4
• Cablei termination follows IEEE-568B standards
• HDCP compliant
• Automatically adjusts feedback, equalization and amplification of signal for easy installation
• LED indication for visual link status and video signal status
• Mounting bracket included

*Perfect transmission conditions - cable run within specified distance range of product, no electrical interference, the use of straight cable runs with no bends or kinks and no patch panels or wall outlets used. Please be advised that the presence of any of these factors in your installation may compromise bandwidth and signal strength.

For longer transmission distance, Ethernet pass- through, to enable devices with 4k resolution or for 48bit Deep Colour compatibility, please see our range of full HDBaseT receivers and extender sets.